Difference between revisions of "Vespa GS 150"
(expanding) |
(upgrading template) |
||
Line 2: | Line 2: | ||
{{ | {{Motorcycle | ||
|name = '''Vespa GS 150''' | |name = '''Vespa GS 150''' | ||
|image = | |image = |
Revision as of 04:31, 30 July 2019
'Vespa GS 150' | |
Manufacturer | [[Vespa]] |
---|---|
Production | 1955 |
Class | [[:Category:Scooter motorcycles|Scooter]] [[Category:Scooter motorcycles]] |
Engine | Single Cylinder, 2 Stroke |
Bore / Stroke | 55.9mm x 55.9mm |
Compression ratio | 7.1 |
Horsepower | 2.01 HP (1.5 KW) @ 7500RPM |
Fuel System | Carburetor |
Transmission | Gear box: 4-Speed Final Drive: Direct drive |
Suspension | Front: Stub axle with swing hub and variable rate coil spring and double action hydraulic damper Rear: Swinging bracket for engine and wheel, with variable rate coil spring and co-axial double action hydraulic damper |
Brakes | Front: Drum Rear: Drum |
Front Tire | 3.5x10 |
Rear Tire | 3.5x10 |
Wheelbase | 46.5 inches (1181 mm) |
Length | 66.89 inches (1699 mm) |
Width | 27.6 inches (701 mm) |
Weight | 109.0 kg (wet) |
Manuals | Service Manual |
The Vespa GS 150 was a Single Cylinder, 2 Stroke scooter produced by Vespa in 1955. Claimed horsepower was 2.01 HP (1.5 KW) @ 7500 RPM.
Engine
A 55.9mm bore x 55.9mm stroke result in a displacement of just 150.0 cubic centimeters.
Drive
The bike has a 4-Speed transmission. Power was moderated via the Wet Multi-plate.
Chassis
It came with a 3.5x10 front tire and a 3.5x10 rear tire. Stopping was achieved via Drum in the front and a Drum in the rear. The front suspension was a Stub axle with swing hub and variable rate coil spring and double action hydraulic damper while the rear was equipped with a Swinging bracket for engine and wheel, with variable rate coil spring and co-axial double action hydraulic damper. The wheelbase was 46.5 inches (1181 mm) long.
1955 - 1961 Vespa GS 150
The Vespa GS150 series reaching from VS1 to VS5 is one of the most appreciated and sought for Vespa models nowadays.