Difference between revisions of "AJS Model 16350"
(upgrading template) |
(template fixes) |
||
Line 1: | Line 1: | ||
{{Motorcycle | {{Motorcycle | ||
|name = | |name = AJS Model 16350 | ||
|photo=ajs-model-16-350-01.jpg | |photo=ajs-model-16-350-01.jpg | ||
|aka = | |aka = |
Latest revision as of 21:48, 23 November 2019
AJS Model 16350 | |
Manufacturer | |
---|---|
Production | 1950-66 |
Engine | Air cooled, single cylinder, 2 valve per cylinder |
Compression ratio | 6.5:1 |
Top Speed | 126 km/h / 78 mph |
Ignition | Battery coil |
Transmission | 4 Speed |
Suspension | Front: Cartridge Rear: Dual chocks, swingarm |
Brakes | Front: Drum Rear: Drum |
Front Tire | 3.25 -19 |
Rear Tire | 3.25 -19 |
Wheelbase | 1400 mm / 56 in |
Seat Height | 810 mm / 32 in |
Weight | |
Fuel Capacity | 13.5 L / 3.6 US gal |
Manuals | Service Manual |
It could reach a top speed of 126 km/h / 78 mph.
Engine[edit | edit source]
The engine featured a 6.5:1 compression ratio.
Chassis[edit | edit source]
It came with a 3.25 -19 front tire and a 3.25 -19 rear tire. Stopping was achieved via Drum in the front and a Drum in the rear. The front suspension was a Cartridge while the rear was equipped with a Dual chocks, swingarm. The Model 16350 was fitted with a 13.5 L / 3.6 US gal fuel tank. The wheelbase was 1400 mm / 56 in long.
Photos[edit | edit source]
Overview[edit | edit source]
AJS Model 16 350
The rigid framed AJS Model 16M 350 cc single
was developed in 1945 from the military Matchless G3/L World War II motorcycle.
Well proven in war service, the 350 cc single remained in production selling
large numbers to the civilian market well into the 1960s. Simple and practical,
the Model 16 needed minimal maintenance and was very economicalideal during
petrol rationing. The company also produced an almost identical motorcycle under
the Matchless name as the Matchless G3L. The only difference between the two was
that the Matchless carried a magneto at the rear of the cylinder barrel, whereas
the AJS magneto was at the front.
In 1953, the Model 16M was modernised with a dual seat replacing the saddle and rear pillion seat. In 1956 the Burman gearbox was replaced with a new four speed unit of AMC's own design and in 1957 further improvements included replacement of the outdated generator with a crankshaft mounted Lucas alternator. The leaky pressed-steel primary drive cover was replaced with an alloy casing.
Neither AJS or Matchless opted for plunger type rear springing, and the Model 16 retained a rigid rear frame until 1949, when pivoted rear suspension controlled by hydraulically dampened spring units designed and made by Matchless became available. The difference was indicated by the S (for springer) designation.
The rugged and reliable AJS Model 16 was ideal for the increasingly popular sport of motorcycle trials. Gaining a C (for competition) designation, modifications included upgrading the frame to a welded duplex tubular frame with an engine cradle to reduce weight and redesigned exhaust and footrests to improve ground clearance. In 1957 it was further redesigned to increase clearance from 7 to 10 inches (180 to 250 mm).[4] Hugh Viney led the AJS works team in the post war years and won the challenging 1947 Scottish Six Days Trial on an AJS 16MC at his first attemptthen repeated the achievement the following year and made it three in a row in 1949. In the 1950s this record was beaten by another AJS Works Team rider Gordon Jackson, who won the Scottish Trial four times.
In 1964 the AJS Model 16C was launched with a completely redesigned 348 cc engine in which the pushrods were housed in cast cylinder barrel 'tunnels'. The 16C also had a Norton-designed geared oil pump to improve lubrication.
To boost US sales the AMC marketing team rebranded the ageing export Model 16 with the new name The Sceptre with new metal tank badges and steel flywheels instead of the old cast iron ones. The compression ratio was also raised to 9:1 and the competition also Norton designed geared oil pump was also fitted as standard.
Make Model. | AJS Model 16 350 |
---|---|
Year | 1950-66 |
Engine Type | Air cooled, single cylinder, 2 valve per cylinder |
Displacement | 347 cc / 21.2 cu in |
Bore X Stroke | 69 × 93 mm |
Compression | 6.5:1 |
Induction | Carburetor |
Ignition | Battery coil |
Starting | Kick |
Max Power | 13.2 kW / 17.95 hp @ 5750 rpm |
Transmission | 4 Speed |
Drive | Chain |
Front Suspension | Cartridge |
Rear Suspension | Dual chocks, swingarm |
Front Brakes | Drum |
Rear Brakes | Drum |
Front Tire | 3.25 -19 |
Rear Tire | 3.25 -19 |
Wheelbase | 1400 mm / 56 in |
Seat Height | 810 mm / 32 in |
Dry-weight | 173 kg / 381 lbs |
Fuel Capacity | 13.5 L / 3.6 US gal |
Top Speed | 126 km/h / 78 mph |
Source | Wikipedia |