Husqvarna CR50: history, specs, pictures
1999
| Manufacturer | Husqvarna |
|---|---|
| Production | 2011 - 2013 |
| Engine | single cylinder, two-stroke |
| Bore / Stroke | 39.5mm x 40.0mm |
| Fuel system | carburetor. dell´orto phbg 19 |
| Ignition type | electronic c.d.i. |
| Battery | 7.1:1 |
| Transmission | Gear box: 1-speed Final Drive: chain |
| Suspension | Front: marzocchi conventional telescopic hydraulic fork with advanced axle Rear: sachs progressive soft damp type with single hydraulic shock absorber, spring pre-load adjustment |
| Brakes | Front: single disc Rear: single disc |
| Front Tire | 60/100-12 |
| Rear Tire | 2.75-10 |
| Wheelbase | 39.17 inches (995 mm) |
| Dimensions | L 55.12 inches (1400 mm) W 25.79 inches (655 mm) H 34.65 inches (880 mm) |
| Seat height | 26.77 inches (680 mm) |
| Weight | 95.68 pounds (43.4 Kg) |
| Fuel capacity | 0.71 Gallon (2.70 Liters) |
| Manuals | Service Manual |
| Tech Specs · Brochures · Reviews · Ads · Videos | |
The Husqvarna CR50 was a single cylinder, two-stroke standard produced by Husqvarna between 2011 and 2013.
Engine
The engine was a liquid cooled single cylinder, two-stroke. A 39.5mm bore x 40.0mm stroke result in a displacement of just 49.0 cubic centimeters.
Drive
The bike has a 1-speed transmission. Power was moderated via the dual stage adjustable clutch for novice/expert.
Chassis
It came with a 60/100-12 front tire and a 2.75-10 rear tire. Stopping was achieved via single disc in the front and a single disc in the rear. The front suspension was a marzocchi conventional telescopic hydraulic fork with advanced axle while the rear was equipped with a sachs progressive soft damp type with single hydraulic shock absorber, spring pre-load adjustment. The CR50 was fitted with a 0.71 Gallon (2.70 Liters) fuel tank. The bike weighed just 95.68 pounds (43.4 Kg). The wheelbase was 39.17 inches (995 mm) long.