It could reach a top speed of 227 km/h / 141 mph.
Manufacturer | Suzuki |
---|---|
Also called | GSX1100L, GSX 1100 L, GSX1100ES, GSX 1100 ES, GSX1100EF (reduced effect), GSX 1100 EF (reduced effect), GSX1100EF, GSX 1100 EF, GSX1100F (reduced effect), GSX 1100 F (reduced effect), GSX1100FR, GSX 1100 FR, GSX1100F, GSX 1100 F, GSX1100G, GSX 1100 G, GSX1100S Katana, GSX 1100 S Katana, GSX 1100 E, GSX 1100, GSX1100E |
Production | 1980 |
Engine | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder |
Compression ratio | 9.5:1 |
Top speed | 227 km/h / 141 mph |
Ignition type | Transistorized pointless |
Battery | 12V, 14Ah |
Transmission | 5 Speed |
Suspension | Front: 37mm Kayaba telescopic fork Rear: Kayaba dual shocks, adjustable spring preload |
Brakes | Front: 2 x 275mm Discs Rear: Single 275mm disc |
Front Tire | 3.50 V19 |
Rear Tire | 4.50 V17 |
Wheelbase | 1549 mm / 61.0 in |
Seat height | 806 mm / 31.75 in |
Weight | (dry), 254 kg / 560 lbs (wet) |
Fuel capacity | 19 Litres / 5.0 US gal / 4.2 Imp gal |
Manuals | Service Manual |
Tech Specs · Brochures · Reviews · Ads · Videos |
Engine
The engine was a Air cooled cooled Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. The engine featured a 9.5:1 compression ratio.
Drive
Power was moderated via the Wet, 18 plates.
Chassis
It came with a 3.50 V19 front tire and a 4.50 V17 rear tire. Stopping was achieved via 2 x 275mm Discs in the front and a Single 275mm disc in the rear. The front suspension was a 37mm Kayaba telescopic fork while the rear was equipped with a Kayaba dual shocks, adjustable spring preload. The GSX1100E was fitted with a 19 Litres / 5.0 US gal / 4.2 Imp gal fuel tank. The wheelbase was 1549 mm / 61.0 in long.
Photos
Overview
Suzuki GSX 1100E
By the late 1970s, the world seemed to be closing in on the superbikes. Germany was the first to impose a ban on all motor cycles with more than 100 bhp, soon after the launch of the 120bhp Kawasaki Z1300. Kawasaki quickly responded with a restricted version of their flagship. Honda were the next to comply with the regulations.
Their 1980 model CBX was equipped with a detuned 95 bhp engine for all markets replacing the previous 105 bhp engine since there were too many complexities involved in producing two separate power units, depending on the country of final sale. 'What power would the new 1100cc version of the popular GS1000 90 bhp Suzuki have when it arrived?' wondered the specialist press. It seemed obvious that with 10 percent more capacity than its smaller stablemates and a brand new four-valve head, it would have much more power. But this was in fact not the case, for the new GSX1100 had a fraction under the permitted 100 bhp. Yet it could still out-perform every other production motor cycle A whole new wave of technology has ebbed over the basic two-valve Suzuki engine to produce the GSX1100 TSCC (twin-swirl combustion chamber) motor. Apart from the obvious doubling of valves, the engine features round cylinder bores in conjunction with squared combustion chambers, an exceedingly complex combustion chamber design to increase swirl for more efficiency and a brand new crankshaft. Interestingly the one obvious advantage of having four valves per cylinder, that of greater valve area, has not been exploited.
The
1100 has a total 38sqmm more valve area per cylinder than the 1100. Out of a
total of 1976 sq mm this makes very little difference indeed. However,
Suzuki state quite rightly that at lower valve openings the multi valve head
is far more efficient. Four 34 mm constant-vacuum carburettors feed the
engine which drinks fuel at a rate of 42-48mpg, which is reasonably frugal,
considering the machine's performance.
A normal duplex cradle frame is used for the GSX in conjunction with air forks. With the 1100, Suzuki have sensibly fitted a balance pipe between the two fork legs, so that constant pressure is assured in both. With the 1000 it is quite easy to give one fork leg the slightest amount more pressure and consequently upset the handling. Aside from the usual air-pressure adjustment for the forks, adjustments are almost infinite on the 1100 for there are four spring pre-load and four rebound damping adjustments at the front and four rebound settings and five preload settings at the rear. All something of a nightmare for the novice, but a dream come true for the road-going racer who takes great delight in setting up his bike for every conceivable road condition and style of riding.
Weighing just 535lb, considerably less than its rivals, and with something around 100 bhp on tap, the Suzuki flagship is quite a roadburner. In fact, its standing start quarter-mile time of a fraction under 11.5secs suggests that if anything, the quoted power figures of the engine are a little on the conservative side. Apart from the shattering acceleration and the gearing-governed top speed of 141 mph, the bike pulls like a train in the gears and the mid-range flat spot that is sometimes apparent on the 1000 is missing. Handling is excellent, even better than on previous Suzuki models. In short, it rates with just about any other bike on the market on its time.
Source Super Bikes by Mike Winfield
Its easy with hindsight to knock the
supersports bikes of the early 1980s, like the Suzuki GSX1100E,
as lumbering dinosaurs of the Jurassic period of motorcycling.
Potent, but large and heavy, these monsters grew because there
was nothing to stop them. They were at the top of the
performance food chain.
The evolution of bikes
like the Suzuki GSX1100E from the relatively nimble
four-cylinder bikes of the 1970s was a result of the demand for
power and speed that outstripped the factories ability to find
an alternative to the more is better philosophy. Without the
benefit of weight saving technology as each additional
horsepower was wrung from the increasingly larger engines, more
kilos were added to beef up the tubular steel chassis.
The Suzuki GSX1100E (or
GS1100E in America) first appeared in 1980 as a replacement for
the two-valve GS range. As the GS was always criticised as being
a homologue of Kawasakis Z1, in one swoop the GSX changed the
face of Suzukis four-cylinder, air-cooled line-up. The 1075cc
four had a bore and stroke of 74mm x 66mm and while it retained
chain-driven double overhead camshafts it now featured four
valves per cylinder and the much-vaunted TSCC, or Twin Swirl
Combustion Chamber. By machining a ridge between the valve pair
and overlapping the valves slightly in the cylinder bore Suzuki
claimed more swirl could be created with a resulting improvement
in combustion efficiency. The bottom end still included a
pressed-up roller bearing crankshaft and with a quartet of
Mikuni 34mm carbs, the power was 100hp (73.6kW) at 8500rpm.
To accommodate this more
potent engine, Suzuki redesigned the chassis and incorporated
styling that broke the traditional Japanese mould. The unusual
angular styling was accentuated by a large rectangular headlamp
and heavy-looking tail section. The large dash also included a
groundbreaking LED-style warning light panel. The 37mm front
fork was a leading-axle type, now with air assist, and the
sturdier swingarm an aluminium alloy fabrication based on those
of the Yoshimura superbikes.
Unfortunately the rest
of the chassis came from the dark ages. Although they included
four-position damping adjustment, the twin rear shock absorbers
werent great, and the front brakes were a pair of 275mm slotted
discs gripped by a pair of weak floating-piston calipers. This
was still the era where compromised floating-piston calipers
went on the front while the rear had a superior dual
opposed-piston caliper. Suzuki had yet to break away from the
traditional wheel sizes of 19in on the front and 17in on the
rear. And with a wheelbase of 1510mm and a dry weight of 243kg
the GSX1100 was never going to be a nimble sportsbike. But when
it came to outright performance it was at the top of the heap in
1980, regularly clocking 230km/h in road tests.
Ultimately the GSX1100E was something of a
watershed, blending the emergent engine technology of the late
1970s with a dubious and overworked chassis that typified the
power race of the period. And while the later derivations had a
more unified look, it is the early examples (like our pictured
bike, a 1981 US-spec GS1100EX) with their chunky, macho style
that epitomise the UJM (Universal Japanese Motorcycle) of the
early 1980s. Powerful, stunningly dependable, and with the looks
of the time, the early GSX1100E represented a pinnacle in the
age of the
dinosaurs.
Make Model | Suzuki GSX 1100E (GS 1100E) |
---|---|
Year | 1980 |
Engine Type | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder |
Displacement | 1074 cc / 65.5 cu-in |
Bore X Stroke | 72 x 66 mm |
Cooling System | Air cooled |
Compression | 9.5:1 |
Lubrication | Wet sump, trochoidal pump |
Induction | 4 x 34mm Mikuni SS4SS carburetors |
Ignition | Transistorized pointless |
Battery | 12V, 14Ah |
Starting | Electric |
Max Power | 72.9 kW / 100 hp @ 8700 rpm |
Max Torque | 85.3 Nm / 8.7 kgf-m / 62.9 ft-lb @ 11200 rpm |
Clutch | Wet, 18 plates |
Transmission | 5 Speed |
Final Drive | Chain, 3/4 x 3/8 (No. 630) D.I.D. endless chain, 42/15, 2.8:1 |
Front Suspension | 37mm Kayaba telescopic fork |
Front Wheel Travel | 130 mm / 5.1 in |
Rear Suspension | Kayaba dual shocks, adjustable spring preload |
Rear Wheel Travel | 107 mm / 4.25 in |
Front Brakes | 2 x 275mm Discs |
Rear Brakes | Single 275mm disc |
Front Tire | 3.50 V19 |
Rear Tire | 4.50 V17 |
Rake | 28° |
Trail | 103 mm / 4.03 in |
Wheelbase | 1549 mm / 61.0 in |
Seat Height | 806 mm / 31.75 in |
Ground Clearance | 152mm / 6.0 in |
Gvwr | 467 kg / 1030 lbs |
Wet Weight | 254 kg / 560 lbs |
Fuel Capacity | 19 Litres / 5.0 US gal / 4.2 Imp gal |
Consumption Average | 5.7 L/100 km / 17.6 km/l / 41.3 US mpg / 50 Imp mpg |
Standing ¼ Mile | 11.4 sec / 118 km/h / 116.8 mph |
Top Speed | 227 km/h / 141 mph |