Vespa ET250: history, specs, pictures
'Vespa ET250' | |
Manufacturer | [[Vespa]] |
---|---|
Also called | ET2 50 |
Production | 2005 |
Engine | single cylinder, two-stroke |
Bore / Stroke | 40.0mm x 39.3mm |
Ignition | electronic cdi |
Transmission | Gear box: automatic Clutch: automatic dry centrifuge type |
Suspension | Front: oscillating arm with helicoidal spring and hydraulic double effect single damper Rear: helicoidal spring and hydraulic double effect single damper |
Brakes | Front: double disc Rear: expanding brake (drum brake) |
Front Tire | 100/80-10 |
Rear Tire | 120/70-10 |
Wheelbase | 50.39 inches (1280 mm) |
Length | 69.29 inches (1760 mm) |
Width | 27.56 inches (700 mm) |
Seat Height | 30.71 inches (780 mm) |
Weight | 198.42 pounds (90.0 Kg) (dry), |
Fuel Capacity | 2.38 Gallon (9.00 Liters) |
Manuals | Service Manual |
The Vespa ET250 was a single cylinder, two-stroke standard produced by Vespa in 2005.
Engine
The engine was a air cooled single cylinder, two-stroke. A 40.0mm bore x 39.3mm stroke result in a displacement of just 49.4 cubic centimeters.
Drive
The bike has a automatic transmission. Power was moderated via the automatic dry centrifuge type.
Chassis
It came with a 100/80-10 front tire and a 120/70-10 rear tire. Stopping was achieved via double disc in the front and a expanding brake (drum brake) in the rear. The front suspension was a oscillating arm with helicoidal spring and hydraulic double effect single damper while the rear was equipped with a helicoidal spring and hydraulic double effect single damper. The ET250 was fitted with a 2.38 Gallon (9.00 Liters) fuel tank. The bike weighed just 198.42 pounds (90.0 Kg). The wheelbase was 50.39 inches (1280 mm) long.