Yamaha YZF1000R1 Rossi Replica
It could reach a top speed of 280.9 km/h.
Yamaha YZF1000R1 Rossi Replica | |
Manufacturer | |
---|---|
Production | 2010 |
Class | [[:Category:Motorcross motorcycles|Motorcross]] [[Category:Motorcross motorcycles]] |
Engine | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. |
Compression ratio | 12.8:1 |
Top Speed | 280.9 km/h |
Ignition | TCI: Transistor Controlled Ignition |
Spark Plug | NGK, CR9EK |
Transmission | 6 Speed |
Frame | Deltabox V aluminum |
Suspension | Front: 43mm inverted telescopic fork w/adjustable preload, compression damping, rebound damping; Rear: Single shock w/piggyback reservoir; adjustable for hi-/lo-speed compression damping, rebound damping, spring preload, |
Brakes | Front: 2x 310mm discs 6 piston calipers Rear: Single 220mm disc 1 piston caliper |
Front Tire | 120/70 ZR17 |
Rear Tire | 190/55 ZR17 |
Wheelbase | 1415 mm / 55.7 in |
Seat Height | 835 mm / 32.8 in |
Weight | 177 kg / 389.4 lb (dry), 206 kg / 454 lb (wet) |
Recommended Oil | Yamalube 10w-40 |
Fuel Capacity | 18 Liters / 4.8 gal |
Manuals | Service Manual |
Engine
The engine was a Liquid cooled cooled Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder.. The engine featured a 12.8:1 compression ratio.
Drive
Power was moderated via the Cable-operated multiplate wet slipper clutch..
Chassis
It came with a 120/70 ZR17 front tire and a 190/55 ZR17 rear tire. Stopping was achieved via 2x 310mm discs 6 piston calipers in the front and a Single 220mm disc 1 piston caliper in the rear. The front suspension was a 43mm inverted telescopic fork w/adjustable preload, compression damping, rebound damping; while the rear was equipped with a Single shock w/piggyback reservoir; adjustable for hi-/lo-speed compression damping, rebound damping, spring preload,. The YZF1000R1 Rossi Replica was fitted with a 18 Liters / 4.8 gal fuel tank. The bike weighed just 177 kg / 389.4 lb. The wheelbase was 1415 mm / 55.7 in long.
Photos
Overview
Yamaha YZF-R1 Rossi Replica L.E.
The new YZF-R1 LE sports Valentino Rossi livery
just like his YZF-M1 MotoGP bike, but will come in very limited numbers. MotoGP
Technology with looks to match.
The new 2010 Yamaha YZF-R1LE not only gives you
much of Valentino Rossi's championship technology, but also his championship
look and style. The R1 is the first ever production motorcycle with a crossplane
crankshaft. The Result? Outrageous torque and raw, high-rpm power providing
incredibly smooth power delivery out of the corners. While the bold Fiat Yamaha
team graphics provide incredibly smooth style.
The YZF-R1 LE is a limited edition Valentino Rossi / Fiat Yamaha replica complete with the number "46" and "The Doctor" logos, including a replica of Valentino Rossi's signature on the fuel tank.
Features and Benefits (USA):
Key Features:
The YZF-R1 garnered the prestigious award as the 2009 Motorcycle of the Year from Motorcyclist Magazine. The YZF-R1 was chosen for its MotoGP®-inspired engine and chassis technology, and for its luxurious fit and finish. Back for 2010, the YZF-R1 is the only production motorcycle with a crossplane crankshaft. Crossplane technology, first pioneered in MotoGP® racing with the M1, puts each piston 90° from the next, with an uneven firing interval of 270° - 180°- 90°- 180°. This uneven order does an amazing thing it actually lets power build more smoothly. That means smooth roll-on delivery out of the corners, with outstanding tractability, followed by very strong high rpm power. It's a feeling that's simply unmatched, like having two engines in one: the low-rpm torquey feel of a twin with the raw, high rpm power of an inline four. This breakthrough technology on the YZF-R1 represents a paradigm shift in both technology and performance.
This R1 keeps all the technological superiorities developed for its predecessor: YCC-T (Yamaha Chip Controlled Throttle) is MotoGP® inspired fly-by-wire technology used to deliver instant throttle response. YCC-I® is Yamaha Chip Controlled Intake which is a variable intake system that broadens the spread of power. The fuel injection system provides optimum air/fuel mixtures for maximum power and smooth throttle response. The R1 features Yamaha D-MODE (or drive mode) with rider-selectable throttle control maps to program YCC-T performance characteristics for riding conditions. The standard map is designed for optimum overall performance. The "A" mode lets the rider enjoy sportier engine response in the low- to mid-speed range, and the "B" mode offers response that is somewhat less sharp for riding situations that require especially sensitive throttle operation. Switching maps is as easy as pushing a button on the handlebar switch.
In keeping with this machine's exceptional cornering ability and crisp handling, the aluminum frame has been designed to offer exceptional rigidity balance. The rear frame is lightweight Controlled-Fill die-cast magnesium, contributing the optimum mass centralization. Suspension includes SOQI front forks which use one of the tricks developed for our winning MotoGP® bikes: independent damping. The left fork handles compression damping and the right side handles the rebound damping. And the rear shock adopts bottom linkage for optimum suspension characteristics. The bodywork does more than add break-away-from-the-crowd styling with its more serious, less busy look. The side fairing is smooth for a sleek appearance. And, instead of the usual four-bulb headlight design, the R1 has only two projector-type bulbs mounted closer to the nose of the bike. This positions ram air ducts closer in for a more compact, smooth look. In addition, the rounded lenses are unique to the supersport industry.
Engine:
Crossplane crankshaft technology proven in victory after victory on MotoGP® machines provides a high-tech uneven firing interval. Unlike typical inline-four engine design, where the two outer and two inner pistons move together in pairs with 180° intervals, the crossplane crankshaft has each connecting rod 90° with a unique firing order of 270° - 180° - 90° - 180°. This overcomes the inherent fluctuations in inertial torque during each engine revolution, and the accompanying peaky torque characteristics. Instead, combustion torque continues to build, giving the rider more linear throttle response with awesome power and traction out of the corners.
To maximize rider comfort as well as power output, the engine adopts a coupling-type balancer that rotates in the opposite direction as the crankshaft. This engine features forged aluminum pistons to take maximum advantage of the power characteristics. Titanium intake valves are lightweight.
A forced-air intake system is
adopted to increase intake efficiency by using the natural airflow during riding
to pressurize the air in the air box. This contributes to outstanding power
delivery characteristics in the high-speed range, while the design also helps to
minimize intake noise.
Slipper-type back torque-limiting clutch greatly facilitates braking/downshifting from high speed. The exhaust system is meticulously designed to enhance engine output while, thanks to its three-way catalyst technology, also reducing exhaust emissions. The silencer is a single expansion type, and the sound coming through from the unique crossplane crankshaft- equipped engine is unlike any other inline-four cylinder production supersport. This fuel-injected engine takes full advantage of YCC-T (Yamaha Chip Controlled Throttle), the MotoGP®-inspired fly-by-wire technology used to deliver instant throttle response. There's also YCC-I, Yamaha Chip Controlled Intake, the variable intake system that broadens the spread of power. Fuel injectors have 12 holes for optimum fuel atomization that translates to the most power from every fuel charge.
Have it your way, thanks to Yamaha D-MODE (or "Drive Mode") variable throttle control. There are three modes that control how YCC-T responds to throttle input from the rider. The selectable "A" mode puts more emphasis on engine response in low to midrange rpm. "B" mode, on the other hand, provides less sharp response to input for riding situations that require especially sensitive throttle operation. The standard map is designed for optimum overall performance. Selecting the map you want is as easy as pressing a button on the handlebars.
Chassis/Suspension:
The frame has a combination of uncompromising rigidity where needed along with carefully achieved flex for the precise rigidity balance this bike needs to give the rider the full benefit of its handling and engine characteristics. It is a sophisticated combination of Controlled-Fill die-cast, stamping, and gravity casting the exact technology needed for each portion of this advanced frame.
SOQI front forks take a page from the championship-winning design of our MotoGP®
weapon, the M1. Since both forks always move together, compression damping
duties can be confined to the left fork, while rebound damping is precisely
handled by the right fork, reducing oil cavitation. The SOQI rear shock
features both high and low speed compression damping plus an easy-to-use screw
hydraulic adjustment for preload. This unit also adopts a pillow-ball-type joint
for exceptional shock absorption, road hold feeling, and damper response. To
achieve maximum performance, a bottom linkage is used to work with the rest of
the chassis refinements for brilliant, crisp handling characteristics.
Factory racers get machines tailored to their preferences. Welcome to the club. R1 has adjustable footrests, with a 15mm height and 3mm front-to-rear adjustment. The press-formed fuel tank has a shape developed using 3-D simulation analysis technology. The elongated shape of the tank allows it to fit neatly within the frame in a way that promotes concentration of mass.
Make Model | Yamaha YZF 1000 R1 Rossi Replica L.E. |
---|---|
Year | 2010 |
Engine Type | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. |
Displacement | 998 cc / 60.9 cu-in |
Bore X Stroke | 78 X 52.2 mm |
Compression | 12.8:1 |
Cooling System | Liquid cooled |
Engine Oil | Synthetic, 10W/40 |
Lubrication | Wet sump |
Induction | Mikuni 45mm throttle body FI |
Ignition | TCI: Transistor Controlled Ignition |
Spark Plug | NGK, CR9EK |
Starting | Electric |
Max Power | 133.9 kW / 182 hp @ 12500 rpm |
Max Torque | 115.5 Nm / 11.8 kgf-m @ 10000 rpm |
Clutch | Cable-operated multiplate wet slipper clutch. |
Transmission | 6 Speed |
Final Drive | "O" ring chain |
Gear Ratio | 1st 38/15 (2.533) 2nd 33/16 (2.063) 3rd 37/21 (1.762) 4th 35/23 (1.522) 5th 30/22 (1.364) 6th 33/26 (1.269) |
Frame | Deltabox V aluminum |
Front Suspension | 43mm inverted telescopic fork w/adjustable preload, compression damping, rebound damping; |
Front Wheel Travel | 120 mm / 4.7 in |
Rear Suspension | Single shock w/piggyback reservoir; adjustable for hi-/lo-speed compression damping, rebound damping, spring preload, |
Rear Wheel Travel | 120 mm / 4.7 in |
Front Brakes | 2x 310mm discs 6 piston calipers |
Rear Brakes | Single 220mm disc 1 piston caliper |
Front Tire | 120/70 ZR17 |
Rear Tire | 190/55 ZR17 |
Rake | 24° |
Trail | 102 mm / 4.0 in |
Dimensions | Length 2070 mm / 81.5 in Width 715 mm / 28.1 in Height 1130 mm / 44.5 in |
Wheelbase | 1415 mm / 55.7 in |
Ground Clearance | 135mm / 5.3 in |
Seat Height | 835 mm / 32.8 in |
Dry Weight | 177 kg / 389.4 lb |
Wet Weight | 206 kg / 454 lb |
Fuel Capacity | 18 Liters / 4.8 gal |
Standing ¼ Mile | 10.5 sec |
Top Speed | 280.9 km/h |