Adly Panther 50: history, specs, pictures
Jump to navigation
Jump to search
| Adly Panther 50 | |
| Manufacturer | |
|---|---|
| Also called | Panther-50 (2T), Panther-50 (4T) |
| Production | 2007 - 2008 |
| Engine | single cylinder, two-stroke |
| Bore / Stroke | 40.0mm x 39.2mm |
| Horsepower | 3.62 HP (2.7 KW) @ 5500RPM |
| Fuel System | carburetor. mikuni vm-16,jet-50 |
| Ignition | c.d.i |
| Suspension | Front: telescope Rear: unit-swing |
| Brakes | Front: single disc Rear: expanding brake (drum brake) |
| Front Tire | 120/70-12 |
| Rear Tire | 120/70-12 |
| Wheelbase | 48.82 inches (1240 mm) |
| Length | 70.87 inches (1800 mm) |
| Width | 30.91 inches (785 mm) |
| Height | 50.79 inches (1290 mm) |
| Seat Height | 32.09 inches (815 mm) |
| Weight | 182.98 pounds (83.0 Kg) (dry), |
| Fuel Capacity | 1.64 Gallon (6.20 Liters) |
| Manuals | Service Manual |
The Adly Panther 50 was a single cylinder, two-stroke standard produced by Adly between 2007 and 2008. Claimed horsepower was 3.62 HP (2.7 KW) @ 5500 RPM.
Engine[edit | edit source]
The engine was a air cooled single cylinder, two-stroke. A 40.0mm bore x 39.2mm stroke result in a displacement of just 49.3 cubic centimeters.
Chassis[edit | edit source]
It came with a 120/70-12 front tire and a 120/70-12 rear tire. Stopping was achieved via single disc in the front and a expanding brake (drum brake) in the rear. The front suspension was a telescope while the rear was equipped with a unit-swing. The Panther 50 was fitted with a 1.64 Gallon (6.20 Liters) fuel tank. The bike weighed just 182.98 pounds (83.0 Kg). The wheelbase was 48.82 inches (1240 mm) long.