Difference between revisions of "Aprilia RS125 Lorenzo Replica"

Aprilia RS125 Lorenzo Replica
Manufacturer	Aprilia
Production	2007
Engine	Single cylinder, two stroke, reed valves induction
Compression ratio	12.5:1
Ignition type	CDI electronic ignition
Transmission	6 Speed
Frame type	Cast aluminum, reinforced box section, sloping twin-spar frame
Suspension	Front: Upside-down forks, Ø 40mm ;
Manuals	Service Manual
	Tech Specs · Brochures · Reviews · Ads · Videos

Revision as of 18:55, 21 June 2019

The engine was a Liquid cooled cooled Single cylinder, two stroke, reed valves induction. The engine featured a 12.5:1 compression ratio.

Power was moderated via the Wet, multi-disc.

Aprilia RS 125 1 Lorenzo Replica

Make Model	Aprilia RS 125 R Lorenzo Replica
Year	2007
Engine Type	Single cylinder, two stroke, reed valves induction
Displacement	124.8 cc / 7.5 cu in
Bore X Stroke	54 x 54.5mm
Compression	12.5:1
Cooling System	Liquid cooled
Lubrication	Separate mixing, volumetric pump
Induction	Dell'Orto PHBH 28 carburetor
Ignition	CDI electronic ignition
Starting	Electric
Alternator	12V, 180W
Max Power	21 kW / 28 hp @ 10500 rpm
Max Torque	19 Nm / 1.9 kgf-m / 14.1 lb-ft @ 9000 rpm
Clutch	Wet, multi-disc
Transmission	6 Speed
Final Drive	17:40
Gear Ratios	1st 10:30 / 2nd 14:29 / 3rd 17:27 / 4th 19:25 / 5th 21:24 / 6th 22:23
Primary Drive	63:19
Frame	Cast aluminum, reinforced box section, sloping twin-spar frame
Front Suspension	Upside-down forks, Ø 40mm
Front Wheel Travel	120 mm / 4.7 in

@@ Line 21: / Line 21: @@
 |battery          =
 |transmission     = 6 Speed
-|frame            = Cast aluminium, reinforced box section, sloping twin-spar frame
+|frame            = Cast aluminum, reinforced box section, sloping twin-spar frame
 |suspension       =Front: Upside-down forks, Ø 40mm <br>
@@ Line 125: / Line 125: @@
 |-
 !Frame
-|Cast aluminium, reinforced box section, sloping twin-spar frame
+|Cast aluminum, reinforced box section, sloping twin-spar frame
 |-
 !Front Suspension