BMW HP2 Rennboxer: history, specs, pictures
The BMW HP2 Rennboxer was a two cylinder boxer, two-stroke standard produced by BMW in 2008.
| BMW HP2 Rennboxer | |
| Manufacturer | |
|---|---|
| Production | 2008 |
| Engine | two cylinder boxer, two-stroke |
| Bore / Stroke | 101.0mm x 73.0mm |
| Fuel System | injection. electronic intake pipe injection / bms-k digital engine management with overrun fuel cut-off, single-spark ignition |
| Transmission | Gear box: 6-speed Final Drive: shaft drive (cardan) |
| Suspension | Front: telelever, spring pre-load continuously variable, compression damping, rebound damping and vehicle height adjustable Rear: evo paralever, öhlins central spring strut, spring pre-load continuously adjustable, rebound and compression damping adjustable, vehicle height adjustable |
| Brakes | Front: double disc Rear: single disc |
| Front Tire | 120/70-17 |
| Rear Tire | 190/55-17 |
| Wheelbase | 58.46 inches (1485 mm) |
| Length | 84.06 inches (2135 mm) |
| Seat Height | 32.68 inches (830 mm) |
| Weight | |
| Fuel Capacity | 4.23 Gallon (16.00 Liters) |
| Manuals | Service Manual |
EngineEdit
The engine was a oil & air cooled two cylinder boxer, two-stroke. A 101.0mm bore x 73.0mm stroke result in a displacement of just 1170.0 cubic centimeters.
DriveEdit
The bike has a 6-speed transmission. Power was moderated via the single dry plate clutch, hydraulically operated.
ChassisEdit
It came with a 120/70-17 front tire and a 190/55-17 rear tire. Stopping was achieved via double disc in the front and a single disc in the rear. The front suspension was a telelever, spring pre-load continuously variable, compression damping, rebound damping and vehicle height adjustable while the rear was equipped with a evo paralever, öhlins central spring strut, spring pre-load continuously adjustable, rebound and compression damping adjustable, vehicle height adjustable. The HP2 Rennboxer was fitted with a 4.23 Gallon (16.00 Liters) fuel tank. The wheelbase was 58.46 inches (1485 mm) long.