BMW K75

**BMW K75**
Manufacturer	BMW
Also called	K 75
Production	1985 - 1996
Class	Naked
Engine	in-line three, four-stroke
Bore / Stroke	67.0mm x 70.0mm
Compression ratio	11.0:1
Top speed	121 mph (194 km/h)
Horse Power	73.35 HP (54.7 KW) @ 8500RPM
Torque	49.2 ft/lbs (66.7 Nm) @ 6750RPM
Sparkplug	NGK D8EA '85-95
Battery	53030 '85-95
Transmission	Gear box: 5-speed ; Final Drive: shaft drive (cardan) ; Clutch: dry, single plate ;
Suspension	Front: telescopic fork with hydraulic shock absorber ; Rear: Monolever swinging arm
Brakes	Front: dual disc ; Rear: single disc
Front Tire	100/90-18
Rear Tire	130/90-17
Wheelbase	59.69 inches (1516 mm)
Dimensions	L 87.4 inches (2220 mm); W 35.39 inches (899 mm);
Seat height	29.92 inches (760 mm)
Weight	500.45 pounds (227.0 Kg) (dry), 228.0 kg (wet)
Fuel capacity	5.55 Gallon (21.00 Liters)
Manuals	Service Manual
	Tech Specs · Brochures · Reviews · Ads · Videos

The BMW K75 was a in-line three, four-stroke Naked motorcycle produced by BMW between 1985 and 1996. It could reach a top speed of 121 mph (194 km/h). Max torque was 49.2 ft/lbs (66.7 Nm) @ 6750 RPM. Claimed horsepower was 73.35 HP (54.7 KW) @ 8500 RPM.

An all-new design that was supposed to replace BMW's traditional flat-twins, the BMW K100 arrived for 1984 restating the virtues of solidity, comfort and exemplary build quality long associated with the marque. An 8-valve twin-cam unit displacing 998cc, the brick-like, four-cylinder motor was laid on its side, lowering the center of gravity, and mounted fore-and-aft to facilitate the retention of BMW's characteristic shaft drive. Bosch electronic fuel injection was employed and the long-stroke four developed its maximum output of 90bhp at a relatively low 8,000rpm. In 1985 the K100 spawned a 740cc three-cylinder K75 variant that featured a 120-degree crankshaft and a higher compression ratio. Weighing less than the K100 and with 75bhp on tap, the K75 was a lively performer and deservedly popular, but did not receive the development that went into the four-cylinder models, which would later benefit from four-valves-per-cylinder heads. The usual range of BMW model variants was produced up to the end of three-cylinder K-Series production in 1995.

Engine

The engine was a liquid cooled in-line three, four-stroke. A 67.0mm bore x 70.0mm stroke result in a displacement of just 740.0 cubic centimeters. Fuel was supplied via a double overhead cams/twin cam (dohc).

Drive

The bike has a 5-speed transmission. Power was moderated via the dry, single plate.

Chassis

It came with a 100/90-18 front tire and a 130/90-17 rear tire. Stopping was achieved via dual disc in the front and a single disc in the rear. The front suspension was a telescopic fork with hydraulic shock absorber while the rear was equipped with a Monolever swinging arm. The K75 was fitted with a 5.55 Gallon (21.00 Liters) fuel tank. The bike weighed just 500.45 pounds (227.0 Kg). The wheelbase was 59.69 inches (1516 mm) long.

1985 BMW K 75

The 1985 MY BMW K 75 has, at its heart, a liquid-cooled, four-stroke, 740cc, in-line three cylinder powerhouse paired to a five-speed manual transmission that can produce a claimed 75 horsepower and 68 Nm of torque.

Also, this naked machine comes standard with a telescopic front fork with a hydraulic shock absorber, a Monolever rear suspension, a dual seat, an analogue instrument cluster, cast-aluminium wheels, a rear luggage rack, and a large, round headlight.

1986 BMW K 75

1986 BMW K 75
1986 BMW K 75
1986 BMW K 75
1986 BMW K 75
1986 BMW K75 in Black
1986 BMW K75 in Black
1986 BMW K75 in Black

The 1986 MY BMW K 75 boasts key features such as a telescopic front fork with a hydraulic shock absorber, a Monolever rear suspension, a dual seat, an analogue instrument cluster, cast-aluminium wheels, a rear luggage rack, and a large, round headlight. In the tech/engine department, it sports a liquid-cooled, four-stroke, 740cc, in-line three cylinder powerplant mated to a five-speed manual transmission, that reaches a maximum power output of 75 horsepower and 68 Nm of torque.