Difference between revisions of "Burnishing Brakes"

* This bedding process is only suitable for the front axle - not the rear.  This is due to the brake force distribution of front and rear axles.  In order to reach 300°C (527°F) on the rear pads you would have to drive several miles with dragging brakes.  However, in that time the front brakes will be glowing red, overheating and thus destroying the front brakes.

* This bedding process is only suitable for the front axle - not the rear.  This is due to the brake force distribution of front and rear axles.  In order to reach 300°C (527°F) on the rear pads you would have to drive several miles with dragging brakes.  However, in that time the front brakes will be glowing red, overheating and thus destroying the front brakes.

* Final note – don’t forget to clean hubs and check the wheel bearings. Also, the brake fluid should be replaced at least every 2 years.

* Final note – don’t forget to clean hubs and check the wheel bearings. Also, the brake fluid should be replaced at least every 2 years.