GAS GAS Raga Factory Replica 300: history, specs, pictures
The GAS GAS Raga Factory Replica 300 was a single cylinder, two-stroke standard produced by GAS GAS in 2014.
| GAS GAS Raga Factory Replica 300 | |
| Manufacturer | |
|---|---|
| Production | 2014 |
| Engine | single cylinder, two-stroke |
| Bore / Stroke | 79.0mm x 60.0mm |
| Fuel System | carburetor. keihin pwk 28 - intake by reed valve |
| Ignition | cdi |
| Transmission | Gear box: 6-speed Final Drive: chain |
| Suspension | Front: marzocchi 40 mm aluminum right-sight-up. Rear: reiger (2-way) hydraulic mono shock absorber |
| Brakes | Front: single disc. floating, 4-piston caliper Rear: single disc. 2-piston caliper |
| Front Tire | 2.75-21 |
| Rear Tire | 4.00-18 |
| Wheelbase | 52.76 inches (1340 mm) |
| Length | 80.51 inches (2045 mm) |
| Height | 44.49 inches (1130 mm) |
| Seat Height | 25.59 inches (650 mm) |
| Weight | 145.51 pounds (66.0 Kg) (dry), |
| Fuel Capacity | 0.63 Gallon (2.40 Liters) |
| Manuals | Service Manual |
EngineEdit
The engine was a liquid cooled single cylinder, two-stroke. A 79.0mm bore x 60.0mm stroke result in a displacement of just 294.1 cubic centimeters. Fuel was supplied via a single overhead cams (sohc).
DriveEdit
The bike has a 6-speed transmission. Power was moderated via the ajp clutch..
ChassisEdit
It came with a 2.75-21 front tire and a 4.00-18 rear tire. Stopping was achieved via single disc. floating, 4-piston caliper in the front and a single disc. 2-piston caliper in the rear. The front suspension was a marzocchi 40 mm aluminum right-sight-up. while the rear was equipped with a reiger (2-way) hydraulic mono shock absorber. The Raga Factory Replica 300 was fitted with a 0.63 Gallon (2.40 Liters) fuel tank. The bike weighed just 145.51 pounds (66.0 Kg). The wheelbase was 52.76 inches (1340 mm) long.