Harley-Davidson FLTRX Road Glide Special 114

Harley-Road-Glide-Special-19-03.jpg
Harley-Davidson FLTRX Road Glide Special 114
Manufacturer
Production 2019
Engine
Four stroke, V-Twin, Milwaukee-Eight 114, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Compression ratio 10.5:1
Ignition Single-fire, non-wasted, map-controlled spark ignition
Transmission 6 Speed Cruise Drive®
Frame Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded
Suspension Front: 41.3 mm telescopic, triple circuit damping
Rear: Low air-adjustable low profile air ride rear suspension
Brakes Front: 2x 300mm discs 4 piston calipers
Rear: Single 300mm discs 4 piston caliper
Weight
Manuals Service Manual



EngineEdit

The engine was a Air cooled cooled Four stroke, V-Twin, Milwaukee-Eight 114, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder. The engine featured a 10.5:1 compression ratio.

DriveEdit

Power was moderated via the Hydraulically actuated, 9 plate wet, with high performance spring.

ChassisEdit

Stopping was achieved via 2x 300mm discs 4 piston calipers in the front and a Single 300mm discs 4 piston caliper in the rear. The front suspension was a 41.3 mm telescopic, triple circuit damping while the rear was equipped with a Low air-adjustable low profile air ride rear suspension.

PhotosEdit

 

OverviewEdit

Harley Davidson FLTRX Road Glide Special 114





Make Model Harley Davidson FLTRX Road Glide Special 114
Year 2019
Engine Type Four stroke, V-Twin, Milwaukee-Eight 114, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Displacement 1868 cc / 114 cu in
Bore X Stroke 102 x 114 mm
Cooling System Air cooled
Compression 10.5:1
Exhaust Black, 2-1-2 dual exhaust with tapered mufflers
Induction Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication Pressurized, dry-sump with oil cooler
Ignition Single-fire, non-wasted, map-controlled spark ignition
Starting Electric
Max Torque 167 Nm / 122 lb-ft @ 3250 rpm
Clutch Hydraulically actuated, 9 plate wet, with high performance spring
Transmission 6 Speed Cruise Drive®
Final Drive Belt, 32/68 ratio
Gear Ratio 1st 9.593 2nd 6.65 3rd 4.938 4th 4 5th 3.407 6th 2.875
Primary Drive Chain, 34/46 ratio
Frame Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded
Lean Angle, Left 31º
Lean Angle, Right 32º
Front Suspension 41.3 mm telescopic, triple circuit damping
Rear Suspension Low air-adjustable low profile air ride rear suspension
Front Brakes 2x 300mm discs 4 piston calipers
Rear Brakes Single 300mm discs 4 piston caliper
Front Wheel Enforcer Cast Aluminum 19 in. x 3.5 in.