Harley-Davidson XA: history, specs, pictures

From CycleChaos
Revision as of 20:34, 24 May 2019 by Daniel45 (talk | contribs) (expanding)
Jump to navigation Jump to search
1942 Harley Davidson XA
1942 Harley-Davidson XA military

Built under a U.S. Government contact during World War II only 1,011 of these unusual motorcycles were produced as the North African phase of WWII was almost over when the model was ready for production. Together with the increased use of the Jeep, and the lack of interchangeability with other Harley-Davidson military models a major concern, the project was canceled. It features rear shaft drive, a hand clutch with foot shift and special disc wheels for desert use. It was a very close copy of the German BMW and Zundapp machines.

The U.S. Army also asked Harley-Davidson to produce a new motorcycle with many of the features of BMW's side-valve and shaft-driven R71. Harley largely copied the BMW engine and drive train and produced the shaft-driven 750 cc 1942 Harley-Davidson XA. This shared no dimensions, no parts and no design concepts (except side valves) with any prior Harley-Davidson engine. Due to the superior cooling of the flat-twin engine with the cylinders across the frame, Harley's XA cylinder heads ran 100 °F (56 °C) cooler than its V-twins.[1] The XA never entered full production: the motorcycle by that time had been eclipsed by the Jeep as the Army's general purpose vehicle, and the WLA—already in production—was sufficient for its limited police, escort, and courier roles. Only 1,000 were made and the XA never went into full production. It remains the only shaft-driven Harley-Davidson ever made.

  • Engine Type Opposed Twin
  • Cylinders Two
  • Displacement 45 cubic inches
  • Bore & Stroke 2.9"x3.2"
  • Carburetor Two Linkert
  • Ignition Battery & Coil
  • Transmission 4-speed
  • Forks H-D spring fork
  • Brakes Drum, front & rear
  • Tire Size F 5.00x15,-R 5.00x15
  • Manufacturer Harley-Davidson

References

  1. Motorcycle Hall of Fame Museum: 1942 Harley-Davidson XA. Motorcyclemuseum.org. Retrieved on 2009-01-05.
Harley-Davidson XA
Manufacturer Harley-Davidson
Production 1942
Class Road
Engine twin, four-stroke
Bore / Stroke 77.8mm x 77.8mm
Horse Power 22.53 HP (16.8 KW) @ 4600RPM
Battery 5.7:1
Suspension Front: leading link
Rear: pluger rigid
Brakes Front: expanding brake (drum brake)
Rear: expanding brake (drum brake)
Front Tire 4.00-18
Rear Tire 4.00-18
Wheelbase 57.48 inches (1460 mm)
Fuel capacity 4.09 Gallon (15.50 Liters)
Manuals Service Manual
Tech Specs · Brochures · Reviews · Ads · Videos

The Harley-Davidson XA was a twin, four-stroke Road motorcycle produced by Harley-Davidson in 1942. Claimed horsepower was 22.53 HP (16.8 KW) @ 4600 RPM.

Engine

A 77.8mm bore x 77.8mm stroke result in a displacement of just 740.0 cubic centimeters. Fuel was supplied via a sidevalves.

Chassis

It came with a 4.00-18 front tire and a 4.00-18 rear tire. Stopping was achieved via expanding brake (drum brake) in the front and a expanding brake (drum brake) in the rear. The front suspension was a leading link while the rear was equipped with a pluger rigid. The XA was fitted with a 4.09 Gallon (15.50 Liters) fuel tank. The wheelbase was 57.48 inches (1460 mm) long.

In Media