Honda 4RC146
Revision as of 01:56, 9 February 2011 by Addicted2speed (talk | contribs)
The 1965 Honda 4RC146 is an improved version of the 2RC146, and nearly identical to it – the only external difference are the shorter exhausts of the 4RC146.
Power is now 30 bhp at 17,000 rpm. In actual practice, the engine hardly ever runs well, with continual Carburetion and ignition problems.
Some interesting data: the piston, as usual for Honda with two compression and one oil scraper rings, weighs 34 g without the pin and rings. The pin, with a diameter of 11 mm weighs 11 g. An inlet valve has a head diameter of 14.5 mm and a stem diameter of 3.8 mm and is 74.4 mm long. Weight: 9 g. Two valve collets and the retainer weigh 1 resp. 3 g. Nobby Clarke said they used tweezers to put the Honda valve gear together.
| Motorcycles: CB series | CBF series | CM/CMX series | CX Series | CBR series | NSR series | CR series | Pacific Coast | XR/XL series | Bros/HawkGT | VF/VFR series | VT series | VTX series | ST series | Valkyrie series | GL series| NR series |
| Mopeds and light motorcycles: Ape models | Cub series | CT series | ST series/Dax | S series |Wave series | Z series |