Difference between revisions of "Honda CR250R"

* Engine Type: 249cc liquid-cooled single-cylinder two-stroke with electronically controlled RC valve

* Bore and Stroke: 66.4mm x 72.0mm

* Compression Ratio: 8.5:1

* Induction: Six-petal crankcase reed-valve

* Carburetion: 38.0mm Mikuni TMX flat-slide with throttle position sensor (TPS)

* Ignition: CD with three-dimensional mapping and electronic advance

* Transmission: Close-ratio five-speed

* Final Drive: #520 chain; 13T/48T

* Front Suspension: 47.0mm inverted Showa cartridge fork with 16-position rebound and 16-position compression-damping adjustability; 12.4-inch travel

* Rear Suspension: Pro-Link Showa single shock with spring-preload, 17-position rebound-damping adjustability, and compression-damping adjustment separated into low-speed (13 positions) and high-speed (3.5 turns); 12.6-inch travel

* Front Brake: Single 240.0mm disc with twin-piston caliper

* Rear Brake: Single 240.0mm disc

* Front Tire: 80/100-21

* Rear Tire: 110/90-19

* Rake: 26.5 degrees

* Trail: 109.8mm (4.32 inches)

* Wheelbase: 58.3 inches

* Seat Height: 37.1 inches

* Ground Clearance: 13.3 inches

* Dry Weight: 213 pounds

* Fuel Capacity: 2.0 gallons