Difference between revisions of "Honda SH125"

**Honda SH125**
Manufacturer	Honda
Also called	Shadow 125, SH 125i Sporty, SH125i Special, SH125i Sporty, SH Mode 125, SH125i, SH 125i, SH 125
Production	2002 - 2019
Class	Scooter
Engine	single cylinder, four-stroke
Bore / Stroke	52.4mm x 57.9mm
Compression ratio	11.0:1
Top speed	60 mph (97 km/h)
Horse Power	11.8 HP (8.8 KW) @ 8500RPM
Torque	8.48 ft/lbs (11.5 Nm) @ 7000RPM
Fuel system	injection. pgm-fi electronic fuel injection
Ignition type	digital transistorised with electronic advance
Battery	11.0:1
Transmission	Gear box: automatic ; Final Drive: belt ; Clutch: automatic; centrifugal ;
Suspension	Front: 33mm telescopic fork ; Rear: dual-damper unit swingarm
Brakes	Front: single disc. abs. two-piston calipers. ; Rear: single disc. abs. single-piston caliper.
Front Tire	100/80-16
Rear Tire	120/80-16
Wheelbase	52.76 inches (1340 mm)
Dimensions	L 80.08 inches (2034 mm); W 29.13 inches (740 mm); H 45.59 inches (1158 mm);
Seat height	31.46 inches (799 mm)
Weight	271.17 pounds (123.0 Kg) (dry), 136.9 kg (wet)
Fuel capacity	1.98 Gallon (7.50 Liters)
Oil capacity	0.26 Gallon (1.00 Liters)
Fuel consumption	1.76 liters/100 km (56.8 km/l or 133.65 mpg)
Manuals	Service Manual
	Tech Specs · Brochures · Reviews · Ads · Videos

Revision as of 02:48, 20 June 2019

2004

2004 Honda SH125

2004 SH125

Engine Type: Liquid-cooled 4-stroke SOHC single
Engine Displacement: 125cc
Bore & Stroke: 52.4 x 57.8mm
Compression Ratio: 11.0 : 1
Carburetion: 26mm VK-type
Max. Power Output: 10.1kW/9000min-1 (95/1/EC)
Max. Torque: 11.5Nm/7000min-1 (95/1/EC)
Ignition: DC CDI
Starter: Electric
Transmission: V-Matic
Final Drive: Belt drive
Length x Width x Height: 2020 x 705 x 1145mm
Wheelbase: 1335mm
Seat Height: 790mm
Ground Clearance: 148mm
Fuel Capacity: 8.3 liters
Dry Weight: 122kg
Front Wheel: 16 x MT2.50 cast aluminum
Rear Wheel: 16 x MT2.75 cast aluminum
Front Tire: 100/80-16 50L (tubeless)
Rear Tire: 120/80-16 60L (tubeless)
Front Suspension: 33mm telescopic fork, 89mm axle travel
Rear Suspension: Dual damper unit swingarm, 70mm axle travel
Front Brakes: 220mm hydraulic disc with dual-piston caliper and resin mould pads
Rear Brakes: 130mm leading/trailing drum and resin mould pads

This motorcycle, scooter, or moped-related article is a stub. You can help Cycle Chaos by expanding it. Contact User:Budlight if you need help.

Honda v • d • e

Motorcycles: CB series \| CBF series \| CM/CMX series \| CX Series \| CBR series \| NSR series \| CR series \| Pacific Coast \| XR/XL series \| Bros/HawkGT \| VF/VFR series \| VT series \| VTX series \| ST series \| Valkyrie series \| GL series\| NR series

Mopeds and light motorcycles: Ape models \| Cub series \| CT series \| ST series/Dax \| S series \|Wave series \| Z series

The Honda SH125i was a single cylinder, four-stroke scooter produced by Honda between 2002 and 2019. It could reach a top speed of 60 mph (97 km/h). Max torque was 8.48 ft/lbs (11.5 Nm) @ 7000 RPM. Claimed horsepower was 11.8 HP (8.8 KW) @ 8500 RPM.

Engine

The engine was a liquid cooled single cylinder, four-stroke. A 52.4mm bore x 57.9mm stroke result in a displacement of just 124.9 cubic centimeters. Fuel was supplied via a single overhead cams (sohc).

Drive

The bike has a automatic transmission. Power was moderated via the automatic; centrifugal.

Chassis

It came with a 100/80-16 front tire and a 120/80-16 rear tire. Stopping was achieved via single disc. abs. two-piston calipers. in the front and a single disc. abs. single-piston caliper. in the rear. The front suspension was a 33mm telescopic fork while the rear was equipped with a dual-damper unit swingarm. The SH125i was fitted with a 1.98 Gallon (7.50 Liters) fuel tank. The bike weighed just 271.17 pounds (123.0 Kg). The wheelbase was 52.76 inches (1340 mm) long.

2017 Honda SH125i

The 2017 SH125i’s high-tensile steel tubular underbone frame is manufactured with both rigidity and durability in mind. Lightweight 16-inch aluminum die-cast wheels are key to its sure-footed handling ability and stability on a variety of road surfaces.

In Media

@@ Line 24: / Line 24: @@
 * Seat Height: 790mm
 * Ground Clearance: 148mm
-* Fuel Capacity: 8.3 litres
+* Fuel Capacity: 8.3 liters
 * Dry Weight: 122kg
 * Front Wheel: 16 x MT2.50 cast aluminum
@@ Line 83: / Line 83: @@
 |fuel_capacity    = 1.98 Gallon (7.50 Liters)
 |oil_capacity     = 0.26 Gallon (1.00 Liters)
-|fuel_consumption = 1.76 litres/100 km (56.8 km/l or 133.65 mpg)
+|fuel_consumption = 1.76 liters/100 km (56.8 km/l or 133.65 mpg)
 |turning_radius   =
 |related          =
@@ Line 107: / Line 107: @@
 The 2017 SH125i’s high-tensile steel tubular underbone frame is manufactured with both rigidity and durability in mind.
-Lightweight 16-inch aluminium die-cast wheels are key to its sure-footed handling ability and stability on a variety of road surfaces.
+Lightweight 16-inch aluminum die-cast wheels are key to its sure-footed handling ability and stability on a variety of road surfaces.