Husqvarna SMR 634 Eddy Seel Replica



The Husqvarna SMR 634 Eddy Seel Replica was a liquid cooled, four stroke, single cylinder,4 valve per cylinder Supermotard motorcycle produced by Husqvarna in 2007.

Husqvarna-smr-634-eddy-seel-replica-2007-2007-2.jpg
Husqvarna SMR 634 Eddy Seel Replica
Manufacturer
Production 2007
Class Supermotard
Engine
liquid cooled, four stroke, single cylinder,4 valve per cylinder
Bore / Stroke 99.1mm x 99.1mm
Compression ratio 12.4:1
Fuel System 41 mm Keihin MX carburetor
Transmission Gear box: 6-speed, manual

Final Drive: chain

Clutch: wet multi-disc, manual
Suspension Front: 45mm Marzocchi upside-down fork
Rear: Sachs progressive single shock absorber
Brakes Front: single 300 mm disc
Rear: single 220 mm disc
Front Tire 120/70 -17
Rear Tire 150/60-17
Wheelbase 58.11 inches (1476 mm)
Seat Height 36.18 inches (919 mm)
Weight 116.0 kg (wet)
Manuals Service Manual

EngineEdit

A 99.1mm bore x 99.1mm stroke result in a displacement of just 634.0 cubic centimeters.

DriveEdit

The bike has a 6-speed, manual transmission. Power was moderated via the wet multi-disc, manual.

ChassisEdit

It came with a 120/70 -17 front tire and a 150/60-17 rear tire. Stopping was achieved via single 300 mm disc in the front and a single 220 mm disc in the rear. The front suspension was a 45mm Marzocchi upside-down fork while the rear was equipped with a Sachs progressive single shock absorber. The wheelbase was 58.11 inches (1476 mm) long.

2007 Husqvarna SMR 634 Eddy Seel ReplicaEdit

     

The 2007 MY Husqvarna SMR 634 Eddy Seel Replica comes in a limited, 100 units, and has been designed 100 years of the Swedish brand, and has the same build as the one Eddy Seel used to wan a world champiosnship. At its heart lies a liquid-cooled, four-stroke, 634cc, single cylinder lump mated to a six-speed manual transmission. In addition, it comes with a high-end Brembo braking system, and a race-derived 45 mm Marzocchi inverted fork and a Sachs progressive rear shock.