KTM Rally 450: history, specs, pictures
The KTM 450 Rally Replica was a single cylinder, four-stroke standard produced by KTM between 2013 and 2019.
| KTM Rally 450 | |
| Manufacturer | |
|---|---|
| Also called | 450 Rally Factory Replica, 450 Rally Prototype, 450 Rally Replica |
| Production | 2013 - 2019 |
| Engine | single cylinder, four-stroke |
| Bore / Stroke | 95.0mm x 63.4mm |
| Fuel System | injection |
| Ignition | keihin ems |
| Transmission | Gear box: 6-speed Final Drive: chain |
| Suspension | Front: wp-usd xplor 48 with preload adjuster Rear: wp xplor pds shock absorber |
| Brakes | Front: single disc. brake calipers on floating bearings Rear: single disc. brake calipers on floating bearings |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Wheelbase | 58.35 inches (1482 mm) |
| Seat Height | 37.8 inches (960 mm) |
| Weight | 306.44 pounds (139.0 Kg) (dry), |
| Fuel Capacity | 2.25 Gallon (8.50 Liters) |
| Manuals | Service Manual |
EngineEdit
The engine was a liquid cooled single cylinder, four-stroke. A 95.0mm bore x 63.4mm stroke result in a displacement of just 449.3 cubic centimeters. Fuel was supplied via a overhead cams (ohc).
DriveEdit
The bike has a 6-speed transmission. Power was moderated via the wet, dds multi-disc clutch, brembo hydraulics.
ChassisEdit
It came with a 90/90-21 front tire and a 140/80-18 rear tire. Stopping was achieved via single disc. brake calipers on floating bearings in the front and a single disc. brake calipers on floating bearings in the rear. The front suspension was a wp-usd xplor 48 with preload adjuster while the rear was equipped with a wp xplor pds shock absorber. The 450 Rally Replica was fitted with a 2.25 Gallon (8.50 Liters) fuel tank. The bike weighed just 306.44 pounds (139.0 Kg). The wheelbase was 58.35 inches (1482 mm) long.