Leading Link Forks

From CycleChaos
Revision as of 15:38, 23 August 2010 by Huntersthompson (talk | contribs)
Jump to navigation Jump to search
Leading Link Suspension

An important early innovation from Harley-Davidson, designed by Bill Harley in 1907. Until then, motorcycle pioneers had mainly used unsprung cycle-type forks, which as speeds rose gave a poor ride and handling: they could also fracture. Harley came up with the solution in his final year at university: two sets of fork legs were connected at the bottom by a pair of forged steel links, which formed a pivot joint. Springing came courtesy of four long coil springs mounted inside the moving set of fork legs - the upper springs for load, the lowers for rebound. The wheel's axle was mounted just in front of the forks' lower attachment (hence leading link). For the low-powered machines of the day, they were rigid, had adequate travel, and a constant wheelbase. And they remained Harley-Davidson's standard front suspension for the next 40 years. They were even reintroduced (although in redesigned form) in 1990!