Open main menu

Suzuki DR-Z400SM

The Suzuki DR-Z400SM is a motorcycle produced by Suzuki from 2005 to 2007. It could reach a top speed of 145 km/h / 90 mph.

DRZ400SMK5 yellow.jpg
Suzuki DR-Z400SM
Manufacturer
Production 2005 - 06
Class Supermotard
Engine
Four stroke, single cylinder, DOHC, 4 valve
Compression ratio 11.3:1
Top Speed 145 km/h / 90 mph
Ignition Digital CDI
Spark Plug NGK CR8E '05-07
Battery YUASA YT7B-BS '05-07
Transmission 5 Speed
Final Drive Chain: 520 ‘05-19[1]
Frame Chrome-moly steel frame, single front down tube
Suspension Front: Telescopic, 49 mm, oil-damped, 11-way compression damping, adjustable spring preload
Rear: Link-type, fully adjustable spring preload, 26-way compression damping
Brakes Front: Single 300 mm floating disc, 2 piston caliper
Rear: Single 240mm disc, 1 piston caliper
Front Tire 120/70-17
Rear Tire 140/70-17
Wheelbase 1460 mm / 57.5 in
Seat Height 890 mm / 35.0 in
Weight 137 kg / 302 lbs (dry), 146 kg / 321 lbs (wet)
Oil Filter K&N KN-136
Recommended Oil Suzuki ECSTAR 10w40
Fuel Capacity 10 Liters / 2.6 US gal / 2.2 Imp gal
Related Suzuki DR-Z400
Suzuki DR-Z400S
Manuals Service Manual

Contents

EngineEdit

The engine was a Liquid cooled cooled Four stroke, single cylinder, DOHC, 4 valve. The engine featured a 11.3:1 compression ratio.

DriveEdit

Power was moderated via the Wet, multiple discs, cable operated.

ChassisEdit

It came with a 120/70-17 front tire and a 140/70-17 rear tire. Stopping was achieved via Single 300 mm floating disc, 2 piston caliper in the front and a Single 240mm disc, 1 piston caliper in the rear. The front suspension was a Telescopic, 49 mm, oil-damped, 11-way compression damping, adjustable spring preload while the rear was equipped with a Link-type, fully adjustable spring preload, 26-way compression damping. The DR-Z 400SM was fitted with a 10 Liters / 2.6 US gal / 2.2 Imp gal fuel tank. The bike weighed just 137 kg / 302 lbs. The wheelbase was 1460 mm / 57.5 in long.


2005Edit


2006Edit

2007Edit


PhotosEdit

OverviewEdit

- Suzuki's new Supermotard model based on DR-Z400S - combines Supermotard style and features in a narrow, lightweight street-legal package - Long travel, Showa-brand inverted front fork derived from RM250 - features adjustable compression/rebound damping and alumite coating on inner tube surfaces for smooth action - A fully-adjustable rear shock absorber with high/low speed compression damping adjuster and aluminum swingarm for precise rear wheel control - Strong braking performance supplied by a front disc brake with a large 300mm floating-type rotor and dual-piston caliper, plus 240mm rear disc brake with single-piston caliper - Black-painted 17" aluminum rims and radial tires: 120/70-R17 front, 140/70- R17 rear

CHASSIS FEATURES: - Compact digital instrument cluster with speedometer, odometer, twin-trip meters with addition/subtraction capability, clock, timer and stopwatch functions - On-road legal lighting with bright 60/55 watt halogen headlight, compact tail/stoplight, lightweight, rubber-mounted turn signals and horn - Narrow profile with smooth transitions between the tank, seat and bodywork - Chrome-moly steel frame is torsionally strong with minimal weight. The backbone tube, front down tube, and steering head gussets form the dry-sump engine oil tank - A bolt-on aluminum subframe helps reduce weight and simplify maintenance - Chrome-moly steel footpegs, aluminum rims/hubs, plus engine guard and rear disc guard


ENGINE FEATURES:

- Lightweight 398cc, DOHC, liquid-cooled, dry-sump engine produces strong, usable low-rpm power - Compact 4-valve cylinder head with 36mm intake valves, 29mm exhaust valves, narrow 28º included valve angle and shim-under-bucket valve adjustment system - SCEM-plated cylinder (nickel-silicon-phosphorous) is lighter and more durable than an iron liner with excellent heat transfer properties - Forged aluminum piston is 10% lighter than a cast piston and receives additional oil-cooling to the piston crown through a crankcase oil jet - Compact 5-speed transmission utilizes a cable-operated clutch with separate outer cover for simplified clutch maintenance - Additional weight savings with magnesium valve cover, clutch cover, and magneto cover - Smooth throttle response with a Mikuni™ BSR36 CV-type carburetor fed by 6-liter airbox. The left side cover has quick-release fasteners for easy access to the air filter - Electric start with lightweight starter motor and a compact 6.5 amp maintenance-free battery - Automatic decompression system for quick/easy engine starts - Thermostatically-controlled cooling fan mounted to the left radiator helps maintain consistent operating temperature in traffic



MCN Review ISAAC NEWTON WOULD have approved. It was Sir Isaac’s Second Law of Motion: Force = Mass x Acceleration, that first explained the relationship between an object’s weight and how that would affect its dynamic behavior. In fact, you could call Newton the godfather of Power/Weight Ratio-based performance, and Lotus’ Colin Chapman his greatest disciple. And no street-legal motorcycle illustrates the physics better than the DR-Z400SM. Based on the highly regarded DR-Z400S dual-sport, obsessive calorie counting has resulted in a full-up wet weight of just 318.5 lbs, pushed by 33.4 horsepower measured at the back wheel. It doesn’t sound like enough to be exciting, but it most certainly is. The SM designation stands for Super-Moto, the latest competition craze, wherein lightweight four-stroke motocross bikes are modified with big brakes and 17-inch wheels to race on combination dirt and asphalt race courses. The concept goes back to the “Superbikers” a made-for-TV event that ran on ABC’s Wide World Of Sports from 1979 to 1985, which pitted talented motorcyclists from all disciplines against one another on individually modified, run-what-ya-brung bikes. The idea appeared to die out when the TV series expired, but was resurrected by the French a few years ago, and has since proved very popular in Europe with a growing following in America. Although serious competition machines have been produced for the class by KTM, Husqvarna and others, the new Suzuki is the first Japanese super-moto to be sold in America, and is completely street legal as delivered, unlike some of the European models. Its arrival in Suzuki’s US warehouses has been largely unheralded, as if the company wanted to test the waters before committing serious advertising dollars. But we’re here to tell you that if you like minimalist machines, you’ll really like the Suzuki DR-Z400SM. It’s not necessary to think of the SM as just a competition bike with lights, because as the Europeans have found, the supermoto also makes a perfect urban assault vehicle, probably quicker from point A to point B in densely populated cities than just about any other motorcycle, as well as a terrific sportbike where rougher and poorly kept roads predominate. THE MOTOR If you were disappointed that the latest 450cc MX engine wasn’t chosen to power the bike, consider that all the state-of-the-art fourstroke motocross engines are very highly stressed and maintenance intensive. They also weren’t designed to pass emissions or the durability cycles required for compliance. The DR400S motor was, and it’s no slouch either. With a bore of stroke of 90mm x 62.6mm, it will rev much higher than larger displacement singles, hitting the rev limiter at 9750 rpm. Remember that an engine’s rev range is an under-appreciated measure of its true performance. When two engines make the same horsepower, but one revs 50% higher, the area under the power curve is much larger for the higher-revving motor, and quarter-mile times back up the significance of the difference. Counterbalanced so that it is very smooth running, it won’t try to shed nuts and bolts at high revs or tire the rider.

To achieve 33.4 hp from 24.3 cubic inches (398cc) the engine uses dual overhead cams to operate four very large valves; pairs of 36mm intakes and 29mm exhausts, surrounding a centrally located spark plug for quick, efficient combustion. The piston is a forged slipper type, to reduce reciprocating weight by at least 10% over a more conventional cast slug. The piston’s top ring is an expensive L-section Dykes-type, which reduces emissions by reducing trapped fuel while it improves sealing efficiency. The aluminum cylinder uses no iron liner, but instead is plated with Suzuki’s proprietary nickel-silicon-phosphorus-carbide (SECM) material to improve heat transfer and reduce engine weight. And finally, the fuel enters via a big 36mm Mikuni CV carb. Although it could no doubt be tuned to make even more power, as delivered it gives a broad torque curve that makes a harmonious match for the machine’s weight and five-speed transmission. The overall effect is a smooth steady flow that’s easy to modulate. Liquid-cooled for efficiency, a thermostatically controlled fan will engage in slow traffic to maintain airflow. Otherwise, the big air-scoops, sized for slower going on dirt, will direct plenty of airflow over the slim radiators on either side. The transmission shifts easily and the ratio spread has been worked out to optimize pull between gears. Although we would have welcomed a sixth gear, we were satisfied with five. (Note that the motocross four-strokes often have only four gears.) The clutch is cable operated, the pull is light and the engagement range is wide enough to make it easy to slip precisely. Fuel efficiency is another benefit obtained from Newton’s Second Law, and we achieved nearly 45 mpg on average, riding enthusiastically. Although we never tried riding for fuel efficiency, we’d guess 50 mpg would have been possible. An electric starter is fitted and the engine features an automatic decompression device to ease starting effort. A choke button is fitted to the side of the carb and is necessary whenever the engine’s even moderately cold. After a minute or so, it will be warm enough to run without the extra enrichment. ROLLING CHASSIS Similar in design to Suzuki’s motocross bikes, the SM’s chassis is a lightweight chromoly steel construction with the engine oil contained in the backbone and front downtube, so that the engine can be a dry-sump design, in order to keep the engine’s weight low in the frame. A bash plate protects the crankcase, but with nearly a foot of ground clearance, it shouldn’t get scratched on pavement or even dirt roads. The lightweight plastic side panels are attached with D-ring Dzus fasteners, so that you have fast access to the air filter or battery. Incidentally, the battery is a compact 12V/10Amphr unit and resides under the left number panel opposite the muffler, where it is both high and low-speed compression damping, something you typically only find on high-end motocross equipment or expensive road-racing shocks. A remote reservoir type for fade resistance, it is also rebound and preload adjustable.

The rear travel is 10.9". However, even with the slightly soft front springs, this is exceptional suspension and the ride is terrific, Barcalounger plush yet with great control and feedback, again thanks to the machine’s light weight. Other than the non-adjustable front preload, we couldn’t think of any way to improve it.

Brakes are an area where super-motos depart sharply from their dirt-bike counterparts and the equipment on the SM is again unique.

The front disc is a big 310mm unit that’s both thin in radial section and heavily drilled to reduce its weight further. Even a few holes in a brake disc increases its efficiency, as the gasses that otherwise build up between the pad and disc can be evacuated and any debris that might tend to get caught and score the disc or pads can usually exit before doing damage.

The front caliper is a two-piston, singleaction type, lighter than a four-piston unit would be. Together they create powerful stopping force but are never grabby, making them ideal for good control on slippery surfaces as well as good pavement. The rear brake is another Swiss-cheesed disc, this one of 240mm, slowed by a single piston caliper. We were impressed with the rear brake’s slowing power as well as how easy it was to avoid sliding the rear tire.

The wheels are what really identify a super-moto. The enduro bike’s lightweight hubs are laced to wide 17-inch black-anodized aluminum hoops in 3.50 and 4.50 widths front and back. And the tires are special, too, H-rated Dunlop Sportmax 208-compound radials in 120/70 front and 140/70 rear sizes. The pressures specified are just 25 psi front and 29 back (solo, or 33 psi rear with a passenger).

These things get noticeably hot and tacky in normal use and stick like glue to the turns. If they weren’t fitted to a bike like the SM, they probably wouldn’t last very long.

RIDING IMPRESSION Initially, the bike feels impossibly tall and short, and we wondered how it could handle securely with such an extreme layout. It took a while to adjust, but adjust we did. The first thing we learned was to be as smooth as possible. In fact, so little body movement is necessary, unless speeds were very high, we’d just lean the bike under us, like you would a dirt bike.

Of course, there was never a need to conserve lean angle with the high ground clearance and narrow footpegs. If the bike felt blown around too much on the freeway, we’d just hug the tank with our knees, so that we would be less likely to over-control the handlebars.

The way the bike can be balanced with the rider’s weight is another rare treat. Sitting in the center of the bike, you could easily influence which end got more grip as you shifted the weight of your torso front and back. On twisty roads, the bike’s bottomless suspension insures that tires stay in constant contact with the road, and even on really rough ground that would get any other bike airborne, the SM stayed securely planted. Even better is the exquisite accuracy of the steering, enabling you to place the bike precisely where you want for maximum traction.


During testing, the only limit to our tested stopping distances was the tendency to nose-stand (stoppie), which was aggravated by the softish fork springs and high Center of Gravity. The carbureted engine is a model of smooth control, never abrupt, and provides surprisingly adequate performance. Only in high-speed passing could we have asked for more horsepower. (However, all the aftermarket goodies created for the popular DR-Z400S enduro will bolt right on.)

INSTRUMENTS/CONTROLS Like the enduro model, the SM gets a trick digital instrument cluster with a bright speedo, dual trips, odometer, clock and even a stopwatch. Subtraction functions are available on the trips and stopwatch as well. However, there is no tachometer, and you’d probably be freaked if there were. The little engine wails to keep your pace high, turning 6170 rpm (calculated) @ 65 mph and 7595 @ 80 mph in top gear, but doesn’t protest. In fact, the valve adjustment interval, 14,500 miles, suggests it will rev like this all day without frequent  maintenance.

Also, both the shifter and brake pedal have folding tips, a neat feature for hard-core use and the handlebars are braced for good measure. However, the sore spot in the package, the seat, will make you think the SM stands for sado-masochism.


A towel over a two-byfour would be as soft. Worse, the top of the seat is so narrow that it fits between the bony rails of the pelvis, like some perverse wedgie. If you didn’t have hemorrhoids before, you will if you don’t fix it. Thankfully, we have an Air-Hawk pad stashed for such occasions. Without it, 50 miles would have been too far, with it, we had an ugly seat we could ride all day. At least upholstery is a cheap fix, as fixes go. What were they thinking?


BOTTOM LINE To give Suzuki credit, not only are they the first Japanese company in the game stateside, but their machine is perhaps a purer expression of the concept than the street-legal 650cc supermotos that are available overseas from Honda and Yamaha. The SM’s motor makes more power per cubic inch and is in a much lighter chassis than the bigger-bore machines. There won’t be a lot to go around, so, if you want one, don’t wait.

Make Model Suzuki DR-Z 400SM
Year 2005 - 06
Engine Type Four stroke, single cylinder, DOHC, 4 valve
Displacement 398 cc / 24.3 cu-in
Bore X Stroke 90 x 62.6 mm.
Cooling System Liquid cooled
Compression 11.3:1
Induction Mikuni BSR36 CV carburetor
Lubrication Dry sump
Ignition Digital CDI
Battery 12V, 6.5Ah
Starting Electric
Max Power 29.2 kW / 39.7 hp @ 8500 rpm (rear wheel: 24.9 kW / 33.4 hp
Max Torque 39 Nm / 3.98 kg-m / 28.8 lb-ft @ 6600 rpm
Clutch Wet, multiple discs, cable operated
Transmission 5 Speed
Final Drive Chain, #520
Frame Chrome-moly steel frame, single front down tube
Front Suspension Telescopic, 49 mm, oil-damped, 11-way compression damping, adjustable spring preload
Rear Suspension Link-type, fully adjustable spring preload, 26-way compression damping
Rear Wheel Travel 277 mm / 10.9 in
Front Brakes Single 300 mm floating disc, 2 piston caliper
Rear Brakes Single 240mm disc, 1 piston caliper
Front Tire 120/70-17
Rear Tire 140/70-17
Dimensions Length 2225 mm / 87.6 in Width 855 mm / 33.7 in.
Wheelbase 1460 mm / 57.5 in
Seat Height 890 mm / 35.0 in
Ground Clearance 260 mm / 10.2 in
Dry Weight 137 kg / 302 lbs
Wet Weight 146 kg / 321 lbs
Fuel Capacity 10 Liters / 2.6 US gal / 2.2 Imp gal
Consumption Average 5.5 L/100 km / 18.2 km/l / 42.8 US mpg / 51.4 Imp mpg
Standing ¼ Mile 15.0 sec
Top Speed 145 km/h / 90 mph

VideosEdit


ReferencesEdit

  1. 2019 Western Power Sports Catalog. Western Power Sports. 2019.