Suzuki VL 250LC INTRUDER: history, specs, pictures

From CycleChaos
Revision as of 02:07, 10 November 2019 by Bob6721 (talk | contribs) (adding recommended_oil)
Jump to navigation Jump to search


Suzuki-vl-250lc-intruder-2012-2016-4.jpg
'Suzuki VL 250LC INTRUDER'
Manufacturer
[[Suzuki]]
Production 2012
Class [[:Category:Cruiser motorcycles|Cruiser]] [[Category:Cruiser motorcycles]]
Engine
Four stroke, V-Twin, SOHC, 3 valves per cylinder
Bore / Stroke 50.8mm x 50.8mm
Compression ratio 10.5:1
Horsepower 24.0 HP (17.9 KW) @ 8500RPM
Torque 16.96 ft/lbs (23.0 Nm) @ 6000RPM
Fuel System Carburetor
Transmission Gear box: 5-Speed

Final Drive: Chain

Clutch: Wet, multiplate
Suspension Front: Telescopic fork, 37 mm, oil/coil damped
Rear: Twin shock, coil springs, 5 way adjustable
Brakes Front: Single 275 mm disc, 1 piston caliper
Rear: Drum
Front Tire 90/90-M18
Rear Tire 130/90-M15
Wheelbase 59.8 inches (1519 mm)
Length 88.19 inches (2240 mm)
Width 34.61 inches (879 mm)
Seat Height 27.01 inches (686 mm)
Weight 159.0 kg (wet)
Recommended Oil Suzuki ECSTAR 10w40
Manuals Service Manual


The Suzuki VL 250LC INTRUDER was a Four stroke, V-Twin, SOHC, 3 valves per cylinder Cruiser motorcycle produced by Suzuki in 2012. Max torque was 16.96 ft/lbs (23.0 Nm) @ 6000 RPM. Claimed horsepower was 24.0 HP (17.9 KW) @ 8500 RPM.

Engine

A 50.8mm bore x 50.8mm stroke result in a displacement of just 248.0 cubic centimeters.

Drive

The bike has a 5-Speed transmission. Power was moderated via the Wet, multiplate.

Chassis

It came with a 90/90-M18 front tire and a 130/90-M15 rear tire. Stopping was achieved via Single 275 mm disc, 1 piston caliper in the front and a Drum in the rear. The front suspension was a Telescopic fork, 37 mm, oil/coil damped while the rear was equipped with a Twin shock, coil springs, 5 way adjustable. The wheelbase was 59.8 inches (1519 mm) long.

2012 - 2016 Suzuki VL 250LC INTRUDER

2012 - 2016 Suzuki VL 250LC INTRUDER 2012 - 2016 Suzuki VL 250LC INTRUDER 2012 - 2016 Suzuki VL 250LC INTRUDER

The bike is quite grabby in first and second gear making a smooth ride difficult at low speeds. Things smooth out as the bike gets going though and speeds in excess of 130km/h are possible without too about 8% higher than the actual speed, a common complaint by many motorcycle owners. I also found that the location of the speedo meant taking my eyes off the road to have a glance.