Triumph Daytona 955i
Jump to navigation
Jump to search
1999
2002
2006
- ENGINE
- Type - Liquid-cooled, DOHC, in-line 3-cylinder
- Capacity - 955cc
- Bore/Stroke - 79 x 65mm
- Compression ratio - 12.0:1
- Fuel system - Multipoint sequential electronic fuel injection
- Ignition - Digital - inductive type - via electronic engine management system
- TRANSMISSION
- Primary drive - gear
- Final drive - X ring chain
- Clutch - Wet, multi-plate
- Gearbox - 6-speed
- CYCLE PARTS
- Frame - Tubular, fabricated aluminum alloy perimeter
- Swingarm - Single-sided, aluminum alloy with eccentric chain adjuster
- Front wheel - Alloy 3-spoke, 17 x 3.5in
- Rear wheel - Alloy 3-spoke, 17 x 6.0in
- Front tire - 120/70 ZR 17
- Rear tire - 190/50 ZR 17
- Front suspension - 45mm forks with dual rate springs and adjustable preload, compression and rebound damping
- Rear suspension - Monoshock with adjustable preload, rebound and compression damping
- Front brakes - Twin 320mm floating discs, 4 piston calipers
- Rear brakes - Single 220mm disc, 2 piston caliper
- DIMENSIONS
- Length - 2072m (81.6in)
- Width (handlebars) - 725mm (28.5in)
- Height - 1165mm (45.9in)
- Seat height - 815mm (32.1in)
- Wheelbase - 1426mm (56.1in)
- Rake/Trail - 22.5 degree/78.7mm
- Weight (dry) - 191kg (420lbs)
- Fuel tank capacity - 20 liters (5.2 gal US)
- PERFORMANCE (Measured at crankshaft to DIN 70020)
- Maximum power - 149PS (147bhp) AT 10,700 rpm
- Maximum torque - 100Nm (74ft.lbf) at 8,200rpm