Difference between revisions of "Vespa P125 ETS"
(template fixes) |
(template fixes) |
||
(One intermediate revision by one other user not shown) | |||
Line 3: | Line 3: | ||
{{Motorcycle | {{Motorcycle | ||
|name = | |name = Vespa P125 ETS | ||
|photo=vespa-p125-ets-1985-1985-1.jpg | |photo=vespa-p125-ets-1985-1985-1.jpg | ||
|aka = | |aka = | ||
|manufacturer = | |manufacturer = Vespa | ||
|parent_company = | |parent_company = | ||
|production = 1985 | |production = 1985 | ||
Line 12: | Line 12: | ||
|predecessor = | |predecessor = | ||
|successor = | |successor = | ||
|class = | |class = Scooter | ||
|engine = Two strike, Single cylinder, air-cooled | |engine = Two strike, Single cylinder, air-cooled | ||
|bore_stroke = 55.9mm x 55.9mm | |bore_stroke = 55.9mm x 55.9mm | ||
Line 69: | Line 69: | ||
[[Category:Vespa scooters]] | [[Category:Vespa scooters]] | ||
[[Category:1980s scooters]] | [[Category:1980s scooters]] | ||
Latest revision as of 20:58, 23 November 2019
Vespa P125 ETS | |
Manufacturer | |
---|---|
Production | 1985 |
Class | Scooter |
Engine | Two strike, Single cylinder, air-cooled |
Bore / Stroke | 55.9mm x 55.9mm |
Compression ratio | 9.5:1 |
Horsepower | 8.58 HP (6.4 KW) @ 6000RPM |
Fuel System | Carburetor |
Transmission | Gear box: 4-Speed, grip-shift, constant mesh Final Drive: Direct drive |
Brakes | Front: Drum 150 mm Rear: Drum 150 mm |
Front Tire | 3.0 x 10" |
Rear Tire | 3.0 x 10" |
Wheelbase | 46.5 inches (1181 mm) |
Length | 66.1 inches (1679 mm) |
Width | 27.6 inches (701 mm) |
Weight | 90.0 kg (wet) |
Manuals | Service Manual |
The Vespa P125 ETS was a Two strike, Single cylinder, air-cooled scooter produced by Vespa in 1985. Claimed horsepower was 8.58 HP (6.4 KW) @ 6000 RPM.
Engine[edit | edit source]
A 55.9mm bore x 55.9mm stroke result in a displacement of just 121.2 cubic centimeters.
Drive[edit | edit source]
The bike has a 4-Speed, grip-shift, constant mesh transmission. Power was moderated via the Wet Multi-plate.
Chassis[edit | edit source]
It came with a 3.0 x 10" front tire and a 3.0 x 10" rear tire. Stopping was achieved via Drum 150 mm in the front and a Drum 150 mm in the rear. The wheelbase was 46.5 inches (1181 mm) long.
1985 Vespa P125 ETS[edit | edit source]
The engine (complete with three transfer ports) produced about 2 bhp more as compared to its installation in an ET3 – presumably this was accomplished by the increased compression ratio and slightly bigger carb size. The electronic ignition was not publicised this time around since this feature could already be found on some of the PK range, with the rest soon to follow. As with its predecessors, a large expansion box type silencer was fitted as standard – these being the only Vespas to feature such an item. An unfortunate consequence of one being fitted on this model was that there was no room for the side-mounted spare wheel found on other variants.