Yamaha IT400
| 'Yamaha IT 400' | |
| Manufacturer | [[Yamaha]] |
|---|---|
| Production | 1978 |
| Class | [[:Category:Enduro motorcycles|Enduro]] [[Category:Enduro motorcycles]] |
| Engine | Single cylinder, two stroke, air-cooled |
| Bore / Stroke | 83.8mm x 83.8mm |
| Compression ratio | 7.6:1 |
| Horsepower | 39.96 HP (29.8 KW) @ 7000RPM |
| Torque | 30.98 ft/lbs (42.0 Nm) @ 6000RPM |
| Spark Plug | NGK B8EV '76-78 , '79 |
| Transmission | Gear box: 5-Speed Final Drive: Chain |
| Suspension | Front: Telescopic forks Rear: Monoshock |
| Brakes | Front: Drum Rear: Drum |
| Front Tire | 3.00-21 |
| Rear Tire | 150/80-18 |
| Wheelbase | 56.3 inches (1430 mm) |
| Weight | 126.0 kg (wet) |
| Manuals | Service Manual |
The Yamaha IT 400 was a Single cylinder, two stroke, air-cooled Trial motorcycle produced by Yamaha in 1978. Max torque was 30.98 ft/lbs (42.0 Nm) @ 6000 RPM. Claimed horsepower was 39.96 HP (29.8 KW) @ 7000 RPM.
Engine
A 83.8mm bore x 83.8mm stroke result in a displacement of just 398.0 cubic centimeters.
Drive
The bike has a 5-Speed transmission. Power was moderated via the Wet multi-discs.
Chassis
It came with a 3.00-21 front tire and a 150/80-18 rear tire. Stopping was achieved via Drum in the front and a Drum in the rear. The front suspension was a Telescopic forks while the rear was equipped with a Monoshock. The wheelbase was 56.3 inches (1430 mm) long.
1976
1978 Yamaha IT 400
The IT 400 motorcycle design is a tough nut for any manufactured to track. Punching the IT through tight wooded sections is easy.
| ||||||||