Yamaha RT-1 360

From CycleChaos
Revision as of 22:36, 23 November 2019 by Bot (talk | contribs) (template fixes)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Yamaha-RT1.jpg
Yamaha RT-1 360
Manufacturer
Production 1970 - 72
Engine
Two stroke, five port, single cylinder
Compression ratio 6.8;1
Ignition Magneto
Transmission 5 Speed
Suspension Front: Telescopic forks
Rear: Dual shocks
Brakes Front: Drum
Rear: Drum
Front Tire 3.25 x 19
Rear Tire 4.00 x 19
Wheelbase 1400 mm / 55.1 in
Weight 117 kg / 258 lbs (wet)
Recommended Oil Yamalube 10w-40
Fuel Capacity 9 Liters / 2.3 US gal
Manuals Service Manual



Engine[edit | edit source]

The engine was a Air cooled cooled Two stroke, five port, single cylinder. The engine featured a 6.8;1 compression ratio.

Chassis[edit | edit source]

It came with a 3.25 x 19 front tire and a 4.00 x 19 rear tire. Stopping was achieved via Drum in the front and a Drum in the rear. The front suspension was a Telescopic forks while the rear was equipped with a Dual shocks. The RT-1 360 was fitted with a 9 Liters / 2.3 US gal fuel tank. The wheelbase was 1400 mm / 55.1 in long.

Photos[edit | edit source]

Yamaha RT-1 360 Yamaha RT-1 360 Yamaha RT-1 360 Yamaha RT-1 360 Yamaha RT-1 360

Overview[edit | edit source]

Yamaha RT-1 360









We are privileged to test this month the actual machine, the Yamaha RT1, which won the motorcycle section of the Roof of Africa Rally in September. Ridden by Roy Linley of the Nomads Club of Cape Town, this Enduro model was at one time leading the rally and came fourth overall behind three cars in a field of approximately 80 which included 11 motorcycles. The Yamaha RT1 is a larger version of the 250cc DTI. It is a cross-country motorcycle with a single cylinder motor of 360cc capacity and is the biggest in the current range of five Yamaha machines designed for riding on the rough. At the same time it is a standard machine, is equipped with lights and can be used on the road. The RT1 has been produced in response to a demand for a machine in the big class capable of competing with the British and Continental singles in European and American sporting events and in particular to take advantage of the big demand for such bikes as a result of the visits to the U.S.A. over the last two years of leading British and Continental Moto-cross men. There is a racing version of the standard RT1, known as the RT1 M, for those whose interests lie only with top-line competition. The RT1 has been eagerly awaited in this country, particularly in view of, first, the successes of the DTI and the 175cc CT1 in numerous trials and scrambles, and secondly, because of the victory of Roy Linley aboard this machine in the Roof of Africa. We were anxious to find out if the RT1 was a worthy partner to its smaller cousins. Accordingly, we asked Roy if we could test his machine. He willingly agreed so this test gives you not only an assessment of the performance of the RT1 but an accurate idea of the behaviour of a famous motorcycle. The RT1 we found to be a machine fully capable of performing any one of three jobs. It is a perfectly acceptable machine for everyday riding on the roads, riding to work, going out on pleasure trips with or without a pillion passenger. Secondly, it can compete with success in club events of the more difficult sporting nature, that is to say, scrambles and foot-up trials. Thirdly, it makes an ideal enduro machine for long distance riding off the tarred roads, whether for fun or in competition. But to begin with, a description of the machine. The engine is a piston-port single cylinder of 351 cc (80 x 70 mm bore and stroke) which has a two-plug cylinder head. In fact, it was not originally designed so but had one plug and a decompressor, a popular fitment in America and Britain for trials. The second plug fits in place of the decompressor. The make of plug incidentally is the NGK B9E which is the recommended plug, although for running-in the B7 is preferred. The engine has the Autolube system, a constant loss system whereby oil is pumped from the oil pump to points in the inlet tracts, lubricating the engine direct from the oil tank with oil un-mixed with petrol. The compression ratio is a modest 6.3:1 and power developed is 30 bhp at 6 000 rpm. The frame is of strong steel tubular construction with twin down-tubes and twin top-tubes from the steering head back to below the saddle. It is extremely rigid. The front end when compared with the frame of the DTI has been strengthened. GEARS There are five gears, the first or lower three are close and the top two are wide, the latter to give easy comfortable touring speeds on the open road and to send the bike along smartly where conditions allow it on-the-rough. It is very simple to change the gear ratios by removing the cover (three Philips screws and one nut) over the gearbox final drive sprocket and changing that sprocket.


CLUTCH The RT1 has inherited the DTI clutch. This clutch system combines well with the robust gearbox and we liked the primary kick start, whereby one can pull in the clutch lever and kick-start in gear should the machine stall on difficult ground. The front suspension has been made stronger in that the yokes of the front forks are heavier than on the DTI. These forks which are telescopic have long action ideal for keeping the front wheel on the ground at speed over rough going. They are not adjustable as on the DTI but are considered to be more reliable. The back shock absorbers are also stronger and adequate for all normal road and rough work. The brakes are the usual arrangement of single leading shoe front and rear. Wheels are of steel. The front tire is a 3.25 x 19 trials universal and the rear is also a trial* universal of 4.00 x 18. That is to say, both tires are of the heavy block tread pattern. There is a cush drive in the rear hub but this wheel is not quickly detachable as on the DTI, which we regard as something of a drawback. We do not know why the Q.D. wheel has been dropped, but perhaps it was in the interests of weight reduction. EQUIPMENT The electrics consist of a 6 volt lighting system with flywheel magneto and battery well protected and in position under the saddle. There is a headlight, taillight, stop-light and indicators. The petrol tank is small and holds 2.5 gallons. The saddle is comfortable and ideal for one person but hardly big enough for two although it is possible to carry two and pillion footrests are fitted. The mudguards are short and the rear mudguard leaves adequate clearance to avoid jamming of stones and mud packing; the front mudguard is also brief but rather too close to the tire. For a semi-competition machine with a heavy tread to its tires it would have been preferable to have a front mudguard with the leading edge close to the tire but the trailing edge well away so that stones etc. cannot jam between mudguard and wheel. The handlebars are high and comfortable and the controls perfect. We like the anti-slip bar grips although these do not suit everybody. The speedometer is calibrated in kilometres and like the rev counter is mounted in rubber over the front forks in a position where it can be seen at once. The air cleaner is an oil-impregnated foam unit which is good for wet conditions but for dusty conditions a paper element would be better. In dusty conditions the foam unit requires frequent cleaning; its position in the centre below the saddle is excellent.


HANDLING Now we come to the interesting part — the handling of the RT1 on the rough. The riding position is excellent and gives one immediate confidence. The seat is comfortable and handlebars are high and cause one to adopt the straight-backed position from which it is easy to stand up on the footrests. The footrests themselves are very safe, and although the rubbers may be torn off when travelling at speed on the rough, the rests themselves will not bend as they are designed to hinge upwards and backWards when striking an obstacle, in the modern approved manner. The position of the rests and the handlebars combined with the long well-damped movement of the suspension make it easy to ride hard over rough ground. The frame being strong and rigid gives the bike good handling characteristics. The swinging arm is one inch longer than the DTI which in effect moves the engine mass Vi" forward. This has no detrimental effect on cornering, the front was pleasantly light when it came to navigating quickly over the twists and turns of a dirt road or across country. Allied with the longer swinging arm, the back shock absorbers, as we have said, are stronger than the DTI but it is considered that for serious scrambling, a heavier spring would give better damping action as the present action is not stiff enough and the shocks don't recover quickly enough. That is to say, the spring doesn't push the plunger out fully during a series of repetitive bumps with the result that the plunger goes further in until the suspension is almost solid. The layout of the machine gave it no vices. The tail end is quick-acting and can be brought round smartly in a power slide on gravel on tight bends, with the engine power band at anything between 2 500 and 5 500 rpm. The handling in this sort of way was always predictable and consistent. The tires gave a good grip on all types of going except on sand, but sand is a law unto itself and the bigger and fatter and softer the tires within reason the better the results one gets. BRAKING The brakes for road work are no more than adequate but on the rough are good. They are well designed for the job. One characteristic of the machine which we liked and which was pointed out to us by Roy was this. Everything is so designed that should you drop the bike, the minimum damage is done. Everything is tucked well out of the way, the footrests, as we have said, are collapsible and the gear-change pedal is of malleable iron. Should you bend it, it is easy to straighten again cold. This is an important consideration for the competition rider. ON THE ROAD We have said that the RT1 is perfectly suitable for use as an ordinary machine on the road, and we found that it was a very pleasant mount for town and country riding on the tar. The acceleration is excellent, and up to about 55 mph you can hold your own with any two- or four-wheeler except those vehicles in the top performance bracket. After 55 to 60 mph the acceleration tails off until the maximum speed of 78 mph is soon reached. The engine revs freely and it is possible to exceed the maximum revs of 6 500 going up through the gears and particularly in top gear on a downhill section. The bike is comfortable and the high riding position gives excellent control under all conditions, wet or fine, town or country. Its competition breeding makes it highly manoeuvrable and in this respect it is better at town work than many road machines. Apart from the lack of weather protection it is in many respects an ideal commuter's bike, and once the handling characteristics are appreciated by the rider, it can be motored up to the limits of its performance anywhere on the tar with comfort and safety. The tank holds only 2.5 gallons bat for its purpose is neat and compact. Mileage per gallon varies between 43 and 53 according to terrain and riding methods, so a full tank will carry one between 90 and 140 miles. The petrol tap has a reserve position. The reserve supply is sufficient for 12 miles. The mudguarding of course is strictly sporting. We felt that the front mudguard could have been longer without detracting in any way from the machine's capabilities. As it was, mud was thrown up into the fins and under the tank among the coils and wiring. For those who would like to obtain more performance, a G.Y.T. kit (Genuine Yamaha Tuning) is available. It is a factory spare. This comprehensive kit pushes the power of the RT1 up from 30 bhp (s> 6 500 rpm to 36 bhp 7 000 rpm. The RT1 is easily converted for scrambles or club foot-up trials as all electrical parts have snap connectors — headlamp, taillamp, indicators and battery. To summarise, we consider that the RT1 is an excellent compromise between a scrambles machine and a road bike, that is to say, it is an ideal enduro mount. The whole machine gave the impression of a well-designed, compact, taut and business-like job which was most satisfying to ride in any conditions but particularly on those long open cross-country stretches. Roy Linley's bike was a well-prepared and well-cared-for specimen and in spite of its hard if brief career to date, it was running extremely well. We are confident that the RT1 will find many enthusiastic owners in this country where conditions for its use in all their variety are so suitable. . • S.A. MOTOR CYCLIST 1970


Make Model Yamaha RT-1 360
Year 1970 - 72
Engine Type Two stroke, five port, single cylinder
Displacement 351 cc / 21.4 cu-in
Bore X Stroke 80 x 70 mm
Cooling System Air cooled
Compression 6.8;1
Lubrication Autolube
Induction VM32SH carburetor
Ignition Magneto
Starting Kick
Max Power 30 hp / 22.3 kW @ 6000 rpm
Max Torque 26.0 lb-ft @ 5 500 rpm
Transmission 5 Speed
Final Drive Chain
Front Suspension Telescopic forks
Rear Suspension Dual shocks
Front Brakes Drum
Rear Brakes Drum
Front Tire 3.25 x 19
Rear Tire 4.00 x 19
Rake 29.5°
Trail 137 mm / 5.3 in
Wheelbase 1400 mm / 55.1 in
Ground Clearance 255 mm / 10.0 in
Wet Weight 117 kg / 258 lbs
Fuel Capacity 9 Liters / 2.3 US gal