Difference between revisions of "Zündapp EM250"
Jump to navigation
Jump to search
(expanding) |
m (no summary specified) |
||
| Line 19: | Line 19: | ||
|power = 4.43 HP (3.3 KW) @ 3100RPM | |power = 4.43 HP (3.3 KW) @ 3100RPM | ||
|torque = | |torque = | ||
|fuel_system = | |fuel_system = carburetor | ||
|ignition = | |ignition = | ||
|spark_plug = | |spark_plug = | ||
Revision as of 00:03, 2 July 2019
| Manufacturer | Zündapp |
|---|---|
| Also called | EM 250 |
| Production | 1925 - 1927 |
| Engine | single cylinder, two-stroke |
| Bore / Stroke | 62.0mm x 82.5mm |
| Top speed | 50 mph (80 km/h) |
| Horse Power | 4.43 HP (3.3 KW) @ 3100RPM |
| Fuel system | carburetor |
| Transmission | Gear box: 3-speed Final Drive: chain |
| Suspension | Front: webb fork Rear: rigid |
| Brakes | Front: expanding brake (drum brake) Rear: expanding brake (drum brake) |
| Front Tire | 2.85-26 |
| Rear Tire | 2.85-26 |
| Manuals | Service Manual |
| Tech Specs · Brochures · Reviews · Ads · Videos | |
The Zündapp EM250 was a single cylinder, two-stroke standard produced by Zündapp between 1925 and 1927. It could reach a top speed of 50 mph (80 km/h). Claimed horsepower was 4.43 HP (3.3 KW) @ 3100 RPM.
Engine
The engine was a air cooled single cylinder, two-stroke. A 62.0mm bore x 82.5mm stroke result in a displacement of just 249.0 cubic centimeters.
Drive
The bike has a 3-speed transmission.
Chassis
It came with a 2.85-26 front tire and a 2.85-26 rear tire. Stopping was achieved via expanding brake (drum brake) in the front and a expanding brake (drum brake) in the rear. The front suspension was a webb fork while the rear was equipped with a rigid.