Benelli TNT135: history, specs, pictures

From CycleChaos
Jump to navigation Jump to search

Benelli TNT135
Also called TNT 135
Production 2017 - 2018
single cylinder, four-stroke
Bore / Stroke 54.0mm x 58.8mm
Horsepower 12.74 HP (9.5 KW) @ 9000RPM
Torque 7.97 ft/lbs (10.8 Nm) @ 7000RPM
Fuel System injection
Ignition cdi
Transmission Gear box: 6-speed

Final Drive: chain

Clutch: wet clutch
Suspension Front: upside-down forks, 41mm
Rear: rear swing arm with lateral shock absorber with spring pre-load adjustment
Brakes Front: double disc. 2 pistons caliper
Rear: single disc
Front Tire 120/70-zr12
Rear Tire 130/70-zr12
Wheelbase 49.21 inches (1250 mm)
Length 68.9 inches (1750 mm)
Width 30.71 inches (780 mm)
Height 42.52 inches (1080 mm)
Seat Height 31.1 inches (790 mm)
Weight 266.76 pounds (121.0 Kg) (dry),
Fuel Capacity 1.9 Gallon (7.20 Liters)
Manuals Service Manual

The Benelli TNT135 was a single cylinder, four-stroke standard produced by Benelli between 2017 and 2018. Max torque was 7.97 ft/lbs (10.8 Nm) @ 7000 RPM. Claimed horsepower was 12.74 HP (9.5 KW) @ 9000 RPM.

Engine[edit | edit source]

The engine was a air cooled single cylinder, four-stroke. A 54.0mm bore x 58.8mm stroke result in a displacement of just 134.7 cubic centimeters. Fuel was supplied via a single overhead cams (sohc).

Drive[edit | edit source]

The bike has a 6-speed transmission. Power was moderated via the wet clutch.

Chassis[edit | edit source]

It came with a 120/70-zr12 front tire and a 130/70-zr12 rear tire. Stopping was achieved via double disc. 2 pistons caliper in the front and a single disc in the rear. The front suspension was a upside-down forks, 41mm while the rear was equipped with a rear swing arm with lateral shock absorber with spring pre-load adjustment. The TNT135 was fitted with a 1.9 Gallon (7.20 Liters) fuel tank. The bike weighed just 266.76 pounds (121.0 Kg). The wheelbase was 49.21 inches (1250 mm) long.