Beta RR 525 MOTARD

From CycleChaos
Jump to navigation Jump to search


Beta RR 525 MOTARD
Manufacturer
Production 2010
Class Enduro
Engine
Single cylinder, 4 stroke, liquid cooled
Bore / Stroke 94.0mm x 94.0mm
Compression ratio 11.0:1
Transmission Gear box: 6-Speed

Final Drive: Chain

Clutch: Wet multi disc
Suspension Front: Hydraulic USD fork
Rear: Monoshock
Brakes Front: Single disc 255 mm
Rear: Single disc 240 mm
Front Tire 90/90-18
Rear Tire 140/80-18
Wheelbase 59.09 inches (1501 mm)
Length 89.41 inches (2271 mm)
Width 32.01 inches (813 mm)
Seat Height 37.01 inches (940 mm)
Weight 120.0 kg (wet)
Manuals Service Manual


The Beta RR 525 MOTARD was a Single cylinder, 4 stroke, liquid cooled Enduro motorcycle produced by Beta in 2010.

Engine[edit]

A 94.0mm bore x 94.0mm stroke result in a displacement of just 510.0 cubic centimeters.

Drive[edit]

The bike has a 6-Speed transmission. Power was moderated via the Wet multi disc.

Chassis[edit]

It came with a 90/90-18 front tire and a 140/80-18 rear tire. Stopping was achieved via Single disc 255 mm in the front and a Single disc 240 mm in the rear. The front suspension was a Hydraulic USD fork while the rear was equipped with a Monoshock. The wheelbase was 59.09 inches (1501 mm) long.

2010 Beta RR 525 MOTARD[edit]

2010 Beta RR 525 MOTARD 2010 Beta RR 525 MOTARD 2010 Beta RR 525 MOTARD 2010 Beta RR 525 MOTARD

The ability to go from dual sport to motard is great, but the bike needs further modifications to be completely effective, primarily larger brakes and revised suspension. It simply can’t be as good at one as it is the other without additional mods.