Beta Rev200: history, specs, pictures
Beta Rev200 | |
Manufacturer | |
---|---|
Also called | Rev 3200, Rev 3 200, REV 3 - 200, REV-3 200 |
Production | 2006 - 2008 |
Engine | single cylinder, two-stroke |
Bore / Stroke | 64.0mm x 64.0mm |
Fuel System | carburetor. keihin pwk ø 28mm |
Ignition | electronic aet 12v - 85w |
Transmission | Gear box: 6-speed Final Drive: chain |
Suspension | Front: hydraulic fork with ø38 mm shaft Rear: hydraulic monoshock |
Brakes | Front: single disc. 4 piston caliper Rear: single disc. 2 piston caliper |
Front Tire | 2.75-21 |
Rear Tire | 4-18 |
Wheelbase | 51.57 inches (1310 mm) |
Length | 78.35 inches (1990 mm) |
Width | 33.46 inches (850 mm) |
Height | 44.09 inches (1120 mm) |
Seat Height | 25.98 inches (660 mm) |
Weight | 154.32 pounds (70.0 Kg) (dry), |
Fuel Capacity | 0.79 Gallon (3.00 Liters) |
Manuals | Service Manual |
The Beta REV-3 200 was a single cylinder, two-stroke standard produced by Beta between 2006 and 2008.
Engine[edit | edit source]
The engine was a liquid cooled single cylinder, two-stroke. A 64.0mm bore x 64.0mm stroke result in a displacement of just 195.0 cubic centimeters.
Drive[edit | edit source]
The bike has a 6-speed transmission. Power was moderated via the wet multi-disc clutch with cush-drive rubber.
Chassis[edit | edit source]
It came with a 2.75-21 front tire and a 4-18 rear tire. Stopping was achieved via single disc. 4 piston caliper in the front and a single disc. 2 piston caliper in the rear. The front suspension was a hydraulic fork with ø38 mm shaft while the rear was equipped with a hydraulic monoshock. The REV-3 200 was fitted with a 0.79 Gallon (3.00 Liters) fuel tank. The bike weighed just 154.32 pounds (70.0 Kg). The wheelbase was 51.57 inches (1310 mm) long.