Beta Rev 4T 250: history, specs, pictures
Beta Rev250 | |
Manufacturer | |
---|---|
Also called | Rev 3, Rev 3250, Rev 3 250, REV 4 T - 250, REV 3 - 250, REV-3 250, REV-4T |
Production | 2004 - 2008 |
Engine | single cylinder, four-stroke |
Bore / Stroke | 77.0mm x 53.6mm |
Fuel System | carburetor. mikuni |
Ignition | electronic |
Transmission | Gear box: 5-speed Final Drive: chain |
Suspension | Front: hydraulic fork with ø38 mm shaft Rear: monoshock |
Brakes | Front: single disc. 4 piston caliper Rear: single disc. 2 piston caliper |
Front Tire | 2.75-21 |
Rear Tire | 4-18 |
Wheelbase | 51.93 inches (1319 mm) |
Length | 79.33 inches (2015 mm) |
Width | 32.48 inches (825 mm) |
Height | 45.67 inches (1160 mm) |
Seat Height | 26.77 inches (680 mm) |
Weight | 165.35 pounds (75.0 Kg) (dry), |
Fuel Capacity | 0.58 Gallon (2.20 Liters) |
Manuals | Service Manual |
The Beta REV-4T was a single cylinder, four-stroke standard produced by Beta between 2004 and 2008.
Engine[edit | edit source]
The engine was a liquid cooled single cylinder, four-stroke. A 77.0mm bore x 53.6mm stroke result in a displacement of just 249.6 cubic centimeters.
Drive[edit | edit source]
The bike has a 5-speed transmission. Power was moderated via the wet multi-disc clutch.
Chassis[edit | edit source]
It came with a 2.75-21 front tire and a 4-18 rear tire. Stopping was achieved via single disc. 4 piston caliper in the front and a single disc. 2 piston caliper in the rear. The front suspension was a hydraulic fork with ø38 mm shaft while the rear was equipped with a monoshock. The REV-4T was fitted with a 0.58 Gallon (2.20 Liters) fuel tank. The bike weighed just 165.35 pounds (75.0 Kg). The wheelbase was 51.93 inches (1319 mm) long.