Buell S2-T: history, specs, pictures

From CycleChaos
Jump to navigation Jump to search


Buell S2-T
Manufacturer
Production 1996
Engine
twin, four-stroke
Bore / Stroke 88.9mm x 96.8mm
Top Speed 128 mph (206 km/h)
Horsepower 74.43 HP (55.5 KW) @ 5200RPM
Torque 75.97 ft/lbs (103.0 Nm) @ 5200RPM
Fuel System carburetor. 1, 40mm keihin
Ignition electronically triggered, dual-stage advance
Transmission Gear box: 5-speed

Final Drive: belt

Clutch: wet plate
Suspension Front: 40mm inverted wp
Rear: wp extension type
Brakes Front: single disc. 1, six-piston pm caliper
Rear: single disc. single-action brembo caliper
Front Tire 120/70-zr17
Rear Tire 170/60-zr17
Wheelbase 54.61 inches (1387 mm)
Length 81.5 inches (2070 mm)
Width 37.52 inches (953 mm)
Height 47.99 inches (1219 mm)
Seat Height 29.76 inches (756 mm)
Weight 485.02 pounds (220.0 Kg) (dry), 233.6 kg (wet)
Fuel Capacity 5.0 Gallon (18.92 Liters)
Fuel Consumption 4.61 liters/100 km (21.7 km/l or 51.02 mpg)
Manuals Service Manual


The Buell S2-T was a twin, four-stroke standard produced by Buell in 1996. It could reach a top speed of 128 mph (206 km/h). Max torque was 75.97 ft/lbs (103.0 Nm) @ 5200 RPM. Claimed horsepower was 74.43 HP (55.5 KW) @ 5200 RPM.

Engine[edit | edit source]

The engine was a air cooled twin, four-stroke. A 88.9mm bore x 96.8mm stroke result in a displacement of just 1203.0 cubic centimeters. Fuel was supplied via a overhead valves (ohv).

Drive[edit | edit source]

The bike has a 5-speed transmission. Power was moderated via the wet plate.

Chassis[edit | edit source]

It came with a 120/70-zr17 front tire and a 170/60-zr17 rear tire. Stopping was achieved via single disc. 1, six-piston pm caliper in the front and a single disc. single-action brembo caliper in the rear. The front suspension was a 40mm inverted wp while the rear was equipped with a wp extension type. The S2-T was fitted with a 5.0 Gallon (18.92 Liters) fuel tank. The bike weighed just 485.02 pounds (220.0 Kg). The wheelbase was 54.61 inches (1387 mm) long.