Derbi Senda Racer: history, specs, pictures
Jump to navigation
Jump to search
| Derbi Senda Racer | |
| Manufacturer | |
|---|---|
| Production | 2005 |
| Engine | single cylinder, two-stroke |
| Bore / Stroke | 39.9mm x 40.0mm |
| Fuel System | carburetor. dell´orto phva-14 |
| Ignition | c.d.i. |
| Transmission | Gear box: 6-speed Clutch: multi-disc |
| Suspension | Front: hydraulic fork, 36 mm Rear: lineal gas single absorber |
| Brakes | Front: single disc Rear: single disc |
| Front Tire | 80/90-21 |
| Rear Tire | 110/80-18 |
| Wheelbase | 52.95 inches (1345 mm) |
| Length | 80.71 inches (2050 mm) |
| Width | 27.36 inches (695 mm) |
| Height | 51.18 inches (1300 mm) |
| Weight | |
| Fuel Capacity | 1.45 Gallon (5.50 Liters) |
| Manuals | Service Manual |
The Derbi Senda Racer was a single cylinder, two-stroke standard produced by Derbi in 2005.
Engine[edit | edit source]
The engine was a liquid cooled single cylinder, two-stroke. A 39.9mm bore x 40.0mm stroke result in a displacement of just 49.9 cubic centimeters.
Drive[edit | edit source]
The bike has a 6-speed transmission. Power was moderated via the multi-disc.
Chassis[edit | edit source]
It came with a 80/90-21 front tire and a 110/80-18 rear tire. Stopping was achieved via single disc in the front and a single disc in the rear. The front suspension was a hydraulic fork, 36 mm while the rear was equipped with a lineal gas single absorber. The Senda Racer was fitted with a 1.45 Gallon (5.50 Liters) fuel tank. The wheelbase was 52.95 inches (1345 mm) long.