Honda CBF250

From CycleChaos
Jump to navigation Jump to search

Intro

Uebersicht cbf250 2005.jpg

Cbf250.jpg

2004

2004 Honda CBF250
2004 Honda CBF250
2004 Honda CBF250



  • Engine Type: Single Cylinder - Air-cooled 4-stroke 4-valve DOHC
  • Engine Displacement: 249 cc
  • Bore & Stroke: 73 x 59.5mm
  • Compression Ratio: 9.3 : 1
  • Carburetion: 32mm VE-L type carburettor
  • Max. Power Output: 20 bhp at 8000 rpm
  • Max. Torque: 22Nm at 6000 rpm
  • Ignition: Digital transistorised with electronic advance
  • Starter: Electric
  • Transmission: 6-speed
  • Final Drive: O-ring sealed chain
  • Length x Width x Height: 2030 x 745 x 1050mm
  • Wheelbase: 1370mm
  • Seat Height: 780mm
  • Ground Clearance: 180mm
  • Fuel Capacity: 16 litres (including 2.5-litre reserve)
  • Dry Weight: 138.5kg
  • Front Wheel: 17M/C x MT2.15
  • Rear Wheel: 17M/C x MT3.00
  • Front Tire: 100/80 17M/C 52S
  • Rear Tire: 130/70 17M/C 62S
  • Front Suspension: 37mm telescopic fork, 130mm axle travel
  • Rear Suspension: Monoshock, 100mm axle travel
  • Front Brakes: 276 x 4mm hydraulic disc with dual-piston caliper and sintered metal pads
  • Rear Brakes: 130mm leading/trailing drum
Honda
Motorcycles: CB series | CBF series | CM/CMX series | CX Series | CBR series | NSR series | CR series | Pacific Coast | XR/XL series | Bros/HawkGT | VF/VFR series | VT series | VTX series | ST series | Valkyrie series | GL series| NR series
Mopeds and light motorcycles: Ape models | Cub series | CT series | ST series/Dax | S series |Wave series | Z series
Honda CBF250
Manufacturer Honda
Also called CBF 250
Production 2003 - 2008
Class Naked
Engine air-cooled, four-stroke, single cylinder, DOHC, 4 valves
Bore / Stroke 73.7mm x 73.7mm
Compression ratio 9.3:1
Horse Power 19.98 HP (14.9 KW) @ 8000RPM
Torque 16.23 ft/lbs (22.0 Nm) @ 6000RPM
Fuel system 32mm carburetor
Ignition type digital transistorised with electronic advance
Battery 9.3:1
Transmission Gear box: 6-speed, manual

Final Drive: chain

Clutch: wet, multiplate with coil springs
Suspension Front: 37mm telescopic fork
Rear: monoshock
Brakes Front: single 276mm disc, 2-piston caliper
Rear: 130mm drum
Front Tire 100/80 - 17
Rear Tire 130/70 - 17
Wheelbase 53.94 inches (1370 mm)
Dimensions L 79.92 inches (2030 mm)
W 29.29 inches (744 mm)
Seat height 30.71 inches (780 mm)
Weight 305.34 pounds (138.5 Kg) (dry), 138.0 kg (wet)
Fuel capacity 4.23 Gallon (16.00 Liters)
Manuals Service Manual
Tech Specs · Brochures · Reviews · Ads · Videos

The Honda CBF 250 was a air-cooled, four-stroke, single cylinder, DOHC, 4 valves Naked motorcycle produced by Honda between 2003 and 2008. Max torque was 16.23 ft/lbs (22.0 Nm) @ 6000 RPM. Claimed horsepower was 19.98 HP (14.9 KW) @ 8000 RPM.

Engine

The engine was a air cooled air-cooled, four-stroke, single cylinder, DOHC, 4 valves. A 73.7mm bore x 73.7mm stroke result in a displacement of just 249.0 cubic centimeters. Fuel was supplied via a double overhead cams/twin cam (dohc).

Drive

The bike has a 6-speed, manual transmission. Power was moderated via the wet, multiplate with coil springs.

Chassis

It came with a 100/80 - 17 front tire and a 130/70 - 17 rear tire. Stopping was achieved via single 276mm disc, 2-piston caliper in the front and a 130mm drum in the rear. The front suspension was a 37mm telescopic fork while the rear was equipped with a monoshock. The CBF 250 was fitted with a 4.23 Gallon (16.00 Liters) fuel tank. The bike weighed just 305.34 pounds (138.5 Kg). The wheelbase was 53.94 inches (1370 mm) long.

2003 Honda CBF 250

2003 Honda CBF 250

Honda's CBF 250 is a motorcycle equipped with a 4-stroke, air cooled, single engine which could develop 20.5 horsepower at 8000rpm.


2004 Honda CBF 250

The 2004 MY Honda CBF 250 has, at its heart, an air-cooled, four-stroke, 249cc, single cylinder powerplant that was paired to a six-speed manual transmission with a chain final drive, and can reach a maximum power output of 20 horsepower and 22 Nm of torque.

Also, it has been fitted with a 37mm telescopic front fork coupled to a rear monoshock suspension, a steel frame, a front disc brake coupled to a rear drum, lightweight, cast-aluminium wheels, wide handlebars, an analogue instrumentation panel, a round headlight with a chromed ring and a dual seat with pillion grab handles.


2005 Honda CBF 250

The 2005 MY Honda CBF 250 comes with features such as a 37mm telescopic front fork coupled to a rear monoshock suspension, a steel frame, a front disc brake coupled to a rear drum, lightweight, cast-aluminium wheels, wide handlebars, an analogue instrumentation panel, a round headlight with a chromed ring and a dual seat with pillion grab handles.

In the engine department it is powered by a four-stroke, air-cooled, 249cc, single cylinder powerhouse, mated to a six-speed manual transmission with a chain final drive, that can produce a claimed 20 horsepower and 22 Nm of torque.


2006 Honda CBF 250

The 2006 MY Honda CBF 250 boasts a maximum power output of 20 horsepower and 22 Nm of torque from its air-cooled, four-stroke, 249cc, single cylinder powerplant that was mated to a six-speed manual transmission with a chain final drive.

Also, it has been fitted with a 37mm telescopic front fork coupled to a rear monoshock suspension, a steel frame, a front disc brake coupled to a rear drum, lightweight, cast-aluminium wheels, wide handlebars, an analogue instrumentation panel, a round headlight with a chromed ring and a dual seat with pillion grab handles.


2007 Honda CBF 250

The 2007 MY Honda CBF 250 has, at its heart, a four-stroke, air-cooled, 249cc, single cylinder powerhouse, mated to a six-speed manual transmission with a chain final drive, that can reach a maximum power output of 20 horsepower and 22 Nm of torque.

In addition, it has standard features such as a front disc brake coupled to a rear drum, die-cast aluminium wheels, a two-up seat with pillion grab handles, wide handlebars, an analogue instrumentation cluster, a blacked-out exhaust system with a chromed muffler, a steel frame and a round headlight.


2008 Honda CBF 250

2008 Honda CBF 250 2008 Honda CBF 250

The 2008 MY Honda CBF 250 has been fitted with a front disc brake coupled to a rear drum, die-cast aluminium wheels, a two-up seat with pillion grab handles, wide handlebars, an analogue instrumentation cluster, a blacked-out exhaust system with a chromed muffler, a steel frame and a round headlight.

In the engine department it is powered by an air-cooled, four-stroke, 249cc, single cylinder powerplant, that was paired to a six-speed manual transmission with a chain final drive, and can produce a claimed 20 horsepower and 22 Nm of torque.


In Media