Husqvarna SM610ie

From CycleChaos
Jump to navigation Jump to search
Husqvarna-SM-610ie-09.jpg
Husqvarna SM610
Manufacturer
Also called SM610R, SM 610 R, SM 610, SM610 Supermoto, SM 610ie, SM610ie, SM 610 S, SM610S
Production 2008 - 09
Engine
Four stroke, single cylinder, SOHC, 4 valves
Compression ratio 11.0:1
Ignition CDI Adjustable advance
Transmission 6 Speed
Frame Steel single tube cradle with steel round tubes: rear frame with light alloy square tubes
Suspension Front: Upside-Down" telescopic hydraulic fork with advanced axle; compression and rebound stroke adjustment, 250mm wheel travel.
Rear: Progressive "Soft Damp" type with single hydraulic shock absorber; spring preload adjustment, compression and rebound adjustment (compression stroke: double adjustment), 290mm wheel travel.
Brakes Front: Single 320mm disc
Rear: Single 220mm disc
Front Tire 120/70 -17
Rear Tire 150/60 -17
Wheelbase 1485 mm / 58.4 in
Seat Height 910 mm / 35.8 in
Weight 140 kg / 314.2 (dry),
Fuel Capacity 12.5 Liters / 3.3 US gal
Manuals Service Manual



Engine[edit | edit source]

The engine was a Liquid cooled cooled Four stroke, single cylinder, SOHC, 4 valves. The engine featured a 11.0:1 compression ratio.

Drive[edit | edit source]

Power was moderated via the Wet,multiplate type; mechanic control.

Chassis[edit | edit source]

It came with a 120/70 -17 front tire and a 150/60 -17 rear tire. Stopping was achieved via Single 320mm disc in the front and a Single 220mm disc in the rear. The front suspension was a Upside-Down" telescopic hydraulic fork with advanced axle; compression and rebound stroke adjustment, 250mm wheel travel. while the rear was equipped with a Progressive "Soft Damp" type with single hydraulic shock absorber; spring preload adjustment, compression and rebound adjustment (compression stroke: double adjustment), 290mm wheel travel.. The SM610ie was fitted with a 12.5 Liters / 3.3 US gal fuel tank. The bike weighed just 140 kg / 314.2. The wheelbase was 1485 mm / 58.4 in long.

Photos[edit | edit source]

Husqvarna SM610 Husqvarna SM610 Husqvarna SM610 Husqvarna SM610

Overview[edit | edit source]

Husqvarna SM 610ie











The SM 610 i.e. now has an electronic injection system that was developed in collaboration with Mikuni. The exhaust system on the four-stroke single cylinder engine has a “closed loop” lambda probe. The catalyser has been redesigned and optimized to meet Euro 3 requirements. Colour schemes will include the classic red/white like on the machine of Gerald Delepine who so dominated the recently concluded 2007 Supermoto Championship. A dark grey color scheme will also be available.


The exhaust system on the four-stroke single cylinder engine has a “closed loop” lambda probe. The catalyser has been redesigned and optimized to meet Euro 3 requirements. The catalyser section on the silencer and the area around the passenger footrests have been covered with stainless steel protection.

The engine now features a 42 mm throttle body with the starter command on the handlebars and there is now a 300 Kpa Mitsubishi “twin jet” fuel injector fitted to the throttle. The pressure regulator (3 Bar) regulates any return of excess fuel to the tank and the MAQS (Modularised Air Quantity Sensor) consists of air temperature, mapping and TPS sensors (Throttle Position Sensor). The Kokusan 360W three-phase ignition flywheel is also new.

The water temperature sensor is positioned on the head. The injection ECU processes signals and governs the operation of the solenoid-operated valve fitted to the right hand side of the radiator. New components include the rugged polyethylene petrol tank with a 40l/h pump; the non-return fuel circuit has quick-fit connections.

The rear mudguard has a new separate number plate carrier with an independent illumination light.

The saddle has been redesigned and has new padding to improve both rider and passenger comfort.

The chassis can be fitted with a main stand that is available as an optional extra.





Make Model Husqvarna SM 610ie
Year 2008 - 09
Engine Type Four stroke, single cylinder, SOHC, 4 valves
Displacement 576 cc / 35.2 cu-in
Bore X Stroke 98.0 x 76.4 mm
Cooling System Liquid cooled
Compression 11.0:1
Induction Electronic injection
Ignition CDI Adjustable advance
Starting Electric & kick
Max Power 54 hp / 40.3 kW @ 7000 rpm
Max Torque 52 Nm / 38.4 ft-lb @ 6500 rpm
Clutch Wet,multiplate type; mechanic control
Transmission 6 Speed
Final Drive Chain
Gear Ratio 1st 2.615 (34/13), 2nd 1.812 (29/16), 3rd 1.350 (27/20), 4th 1.091 (24/22), 5th 0.916 (22/24), 6th 0.769 (20/26)
Frame Steel single tube cradle with steel round tubes: rear frame with light alloy square tubes
Front Suspension Upside-Down" telescopic hydraulic fork with advanced axle; compression and rebound stroke adjustment, 250mm wheel travel.
Front Wheel Travel 250 mm / 9.8 in
Rear Suspension Progressive "Soft Damp" type with single hydraulic shock absorber; spring preload adjustment, compression and rebound adjustment (compression stroke: double adjustment), 290mm wheel travel.
Rear Wheel Travel 290 mm / 11.4 in
Front Brakes Single 320mm disc
Rear Brakes Single 220mm disc
Front Tire 120/70 -17
Rear Tire 150/60 -17
Wheelbase 1485 mm / 58.4 in
Seat Height 910 mm / 35.8 in
Ground Clearance 245 mm/ 9.4 in
Dry Weight 140 kg / 314.2
Fuel Capacity 12.5 Liters / 3.3 US gal