Triumph Daytona 955i Centennial Edition

From CycleChaos
Jump to navigation Jump to search
Triumph-Daytona-955i-Centennial-Edition.jpg
Triumph Daytona 955i Centennial Edition
Manufacturer
Production 200 Units
Engine
Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder.
Compression ratio 12.0:1
Top Speed 263 km/h / 163.5 mph
Ignition Digital inductive
Spark Plug NGK, DPR8EA-9
Transmission 6 Speed
Frame Tubular, fabricated aluminum alloy perimeter, swingarm single sided, aluminum alloy with eccentric chain adjuster
Suspension Front: 45 mm Forks with dual rate springs and adjustable preload, compression and rebound damping
Rear: Monoshock with adjustable preload, compression and rebound damping
Brakes Front: 2 x 320 mm Discs, 4 piston calipers
Rear: Single 220 mm disc, 2 piston caliper
Front Tire 120/70 ZR17
Rear Tire 190/50 ZR17
Seat Height 815 mm / 32.1 in
Weight 188 kg / 414 lbs (dry),
Fuel Capacity 21 Liters / 5.5 US gal / 4.6 Imp gal
Manuals Service Manual


It could reach a top speed of 263 km/h / 163.5 mph.

Engine[edit | edit source]

The engine was a Liquid cooled cooled Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder.. The engine featured a 12.0:1 compression ratio.

Drive[edit | edit source]

Power was moderated via the Wet, multi-plate.

Chassis[edit | edit source]

It came with a 120/70 ZR17 front tire and a 190/50 ZR17 rear tire. Stopping was achieved via 2 x 320 mm Discs, 4 piston calipers in the front and a Single 220 mm disc, 2 piston caliper in the rear. The front suspension was a 45 mm Forks with dual rate springs and adjustable preload, compression and rebound damping while the rear was equipped with a Monoshock with adjustable preload, compression and rebound damping. The Daytona 955i Centennial Edition was fitted with a 21 Liters / 5.5 US gal / 4.6 Imp gal fuel tank. The bike weighed just 188 kg / 414 lbs.

Photos[edit | edit source]

Triumph Daytona 955i Centennial Edition Triumph Daytona 955i Centennial Edition Triumph Daytona 955i Centennial Edition

Overview[edit | edit source]

Triumph Daytona 955i Centennial Edition








It is only fitting that the flagship model of Triumph's modern success story should receive the centenary treatment too. The power-packed Centennial Edition Daytona keeps the 2002 engine and chassis modifications but reverts to a single-sided swing-arm for this special edition.  A color-matched seat cowl and carbon fibre side panels and cockpit infills set-off the sensational one-off Aston Green paint scheme. A special milestone centenary badge completes the look.


A

with the same specifications, was also available in 2002, and came in Tornado Red.



The 955i CE features

- 200 examples made. - One color option of Aston (British Racing) Green, which was offered only on the 2002 955i Centennial Edition. - Carbon fiber inlaid panels between the gas tank and tail fairing. - Carbon fiber rear wheel hugger. - Single-sided swing arm (like the previous and later Daytona 955i). - Forged steel crankshaft, forged steel connecting rods, and forged aluminum pistons; non-CE/SE 955i engines had cast versions of these components. These engine components are the most distinctive CE/SE-specific options, and increased the maximum power output significantly compared to the cast-component engines.



Make Model Triumph Daytona 955i Centennial Edition
Year 2002
Production 200 Units
Engine Type Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder.
Displacement 955 cc / 54.0 cu-in
Bore X Stroke 79 x 65 mm
Cooling System Liquid cooled
Compression 12.0:1
Lubrication Wet sump
Engine Oil Synthetic, 15W/40 Synthetic
Induction Multipoint sequential electronic injection
Ignition Digital inductive
Spark Plug NGK, DPR8EA-9
Starting Electric
Max Power NA
Max Torque NA
Clutch Wet, multi-plate
Transmission 6 Speed
Final Drive O-ring chain
Frame Tubular, fabricated aluminum alloy perimeter, swingarm single sided, aluminum alloy with eccentric chain adjuster
Front Suspension 45 mm Forks with dual rate springs and adjustable preload, compression and rebound damping
Rear Suspension Monoshock with adjustable preload, compression and rebound damping
Front Brakes 2 x 320 mm Discs, 4 piston calipers
Rear Brakes Single 220 mm disc, 2 piston caliper
Front Wheel Alloy 3 spoke, 17 x 3.5 in
Rear Wheel Alloy 3 spoke, 17 x 6.0 in
Front Tire 120/70 ZR17
Rear Tire 190/50 ZR17
Rake 22.5º
Trail 79 mm / 3.1 in
Dimensions Length 2072 mm / 81.6 in Width 725 mm / 28.5 in Height 1165 mm / 45.9in
Wheel Base 1426mm / 56.1in
Seat Height 815 mm / 32.1 in
Dry Weight 188 kg / 414 lbs
Fuel Capacity 21 Liters / 5.5 US gal / 4.6 Imp gal
Top Speed 263 km/h / 163.5 mph