Difference between revisions of "Manual transmission"
Jump to navigation
Jump to search
m (New page: {{Main|transmission}} Manual transmission come in two basic types: * a simple but rugged sliding-mesh or unsynchronized / non-synchronous system, where straight-cut spur gear sets are sp...) |
m (Robot: Automated text replacement (-friction +friction)) |
||
Line 4: | Line 4: | ||
* a simple but rugged sliding-mesh or unsynchronized / non-synchronous system, where straight-cut spur gear sets are spinning freely, and must be synchronized by the operator matching engine revs to road speed, to avoid noisy and damaging "gear clash", | * a simple but rugged sliding-mesh or unsynchronized / non-synchronous system, where straight-cut spur gear sets are spinning freely, and must be synchronized by the operator matching engine revs to road speed, to avoid noisy and damaging "gear clash", | ||
* and the now common constant-mesh gearboxes which can include non-synchronised, or synchronized / synchromesh systems, where diagonal cut helical (and sometimes double-helical) gear sets are constantly "meshed" together, and a dog clutch is used for changing gears. On synchromesh boxes, friction cones or "synchro-rings" are used in addition to the dog clutch. | * and the now common constant-mesh gearboxes which can include non-synchronised, or synchronized / synchromesh systems, where diagonal cut helical (and sometimes double-helical) gear sets are constantly "meshed" together, and a dog clutch is used for changing gears. On synchromesh boxes, [[friction]] cones or "synchro-rings" are used in addition to the dog clutch. | ||
[[Category:Definitions]] | [[Category:Definitions]] |
Latest revision as of 21:23, 26 November 2010
Main page: transmission
Manual transmission come in two basic types:
- a simple but rugged sliding-mesh or unsynchronized / non-synchronous system, where straight-cut spur gear sets are spinning freely, and must be synchronized by the operator matching engine revs to road speed, to avoid noisy and damaging "gear clash",
- and the now common constant-mesh gearboxes which can include non-synchronised, or synchronized / synchromesh systems, where diagonal cut helical (and sometimes double-helical) gear sets are constantly "meshed" together, and a dog clutch is used for changing gears. On synchromesh boxes, friction cones or "synchro-rings" are used in addition to the dog clutch.