Aprilia RS125 Lorenzo Replica
Jump to navigation
Jump to search
Aprilia RS125 Lorenzo Replica | |
Manufacturer | |
---|---|
Production | 2007 |
Engine | Single cylinder, two stroke, reed valves induction |
Compression ratio | 12.5:1 |
Ignition | CDI electronic ignition |
Transmission | 6 Speed |
Frame | Cast aluminum, reinforced box section, sloping twin-spar frame |
Suspension | Front: Upside-down forks, Ø 40mm |
Weight | |
Manuals | Service Manual |
Engine[edit | edit source]
The engine was a Liquid cooled cooled Single cylinder, two stroke, reed valves induction. The engine featured a 12.5:1 compression ratio.
Drive[edit | edit source]
Power was moderated via the Wet, multi-disc.
Photos[edit | edit source]
Overview[edit | edit source]
Aprilia RS 125 1 Lorenzo Replica
Make Model | Aprilia RS 125 R Lorenzo Replica |
---|---|
Year | 2007 |
Engine Type | Single cylinder, two stroke, reed valves induction |
Displacement | 124.8 cc / 7.5 cu in |
Bore X Stroke | 54 x 54.5mm |
Compression | 12.5:1 |
Cooling System | Liquid cooled |
Lubrication | Separate mixing, volumetric pump |
Induction | Dell'Orto PHBH 28 carburetor |
Ignition | CDI electronic ignition |
Starting | Electric |
Alternator | 12V, 180W |
Max Power | 21 kW / 28 hp @ 10500 rpm |
Max Torque | 19 Nm / 1.9 kgf-m / 14.1 lb-ft @ 9000 rpm |
Clutch | Wet, multi-disc |
Transmission | 6 Speed |
Final Drive | 17:40 |
Gear Ratios | 1st 10:30 / 2nd 14:29 / 3rd 17:27 / 4th 19:25 / 5th 21:24 / 6th 22:23 |
Primary Drive | 63:19 |
Frame | Cast aluminum, reinforced box section, sloping twin-spar frame |
Front Suspension | Upside-down forks, Ø 40mm |
Front Wheel Travel | 120 mm / 4.7 in |