Difference between revisions of "Beta Alp350"
(expanding) |
(upgrading template) |
||
| Line 1: | Line 1: | ||
{{ | {{Motorcycle | ||
|name = '''Beta Alp350''' | |name = '''Beta Alp350''' | ||
|image = | |image = | ||
Revision as of 23:30, 29 July 2019
| 'Beta Alp350' | |
| Manufacturer | [[Beta]] |
|---|---|
| Also called | Alp 4.0 |
| Production | 2004 - 2012 |
| Class | [[:Category:Enduro motorcycles|Enduro]] [[Category:Enduro motorcycles]] |
| Engine | single cylinder, four-stroke |
| Bore / Stroke | 79.0mm x 71.2mm |
| Compression ratio | 9.5:1 |
| Ignition | electronic |
| Battery | 9.5:1 |
| Transmission | Gear box: 6-speed Final Drive: chain |
| Suspension | Front: hydraulic fork with ø46 mm shaft Rear: monoshock with adjustable spring preload |
| Brakes | Front: single disc Rear: single disc |
| Front Tire | 90/90-21 |
| Rear Tire | 130/90-18 |
| Wheelbase | 56.85 inches (1444 mm) |
| Length | 86.93 inches (2208 mm) |
| Width | 33.46 inches (850 mm) |
| Height | 48.82 inches (1240 mm) |
| Seat Height | 33.98 inches (863 mm) |
| Weight | 293.21 pounds (133.0 Kg) (dry), 133.0 kg (wet) |
| Fuel Capacity | 2.77 Gallon (10.50 Liters) |
| Manuals | Service Manual |
The Beta Alp 4.0 was a single cylinder, four-stroke Enduro motorcycle produced by Beta between 2004 and 2012.
Engine
The engine was a air cooled single cylinder, four-stroke. A 79.0mm bore x 71.2mm stroke result in a displacement of just 349.0 cubic centimeters. Fuel was supplied via a single overhead cams (sohc).
Drive
The bike has a 6-speed transmission. Power was moderated via the wet multi-plate.
Chassis
It came with a 90/90-21 front tire and a 130/90-18 rear tire. Stopping was achieved via single disc in the front and a single disc in the rear. The front suspension was a hydraulic fork with ø46 mm shaft while the rear was equipped with a monoshock with adjustable spring preload. The Alp 4.0 was fitted with a 2.77 Gallon (10.50 Liters) fuel tank. The bike weighed just 293.21 pounds (133.0 Kg). The wheelbase was 56.85 inches (1444 mm) long.
2004 Beta Alp 4.0
The Beta ALP 4.0 is a vehicle built for mounting, being used to conquer the tricky mountain and woods paths. The design is simple and the 350cc, 4 stroke engine is one classic piece of engineering, completely reliable.