Difference between revisions of "Norton Dominator"

Line 7:

In 1953 the original plunger type rear suspension was replaced by a more efficient swinging-arm arrangement and shortly afterwards the frame was changed to the famous 'Featherbed', a legend in itself. These improvements now gave the Dominator excellent road manners which appealed to the sports-minded enthusiast, who now could experience the race-bred qualities that had previously been confined to the track.

The 1961 sports special model had various modifications over the standard version. Most noticeable was the absence of silencer on the left-hand side. Instead, siames pipes were utilized and this obviously aided ground clearance when enthusiastic riding was called for In fact, ground clearance was so good that only ~~tyre~~ adhesion determined the angle of lean that was available.

The 1961 sports special model had various modifications over the standard version. Most noticeable was the absence of silencer on the left-hand side. Instead, siames pipes were utilized and this obviously aided ground clearance when enthusiastic riding was called for In fact, ground clearance was so good that only tire adhesion determined the angle of lean that was available.

Handling was also second to none, and on long twisting country roads the Dominator was a joy to ride. With positive steering and taut handling it gave the rider an unsurpassed degree of confidence. Obviously, the Featherbed frame was partly responsible. Roadholder front forks were used and these were complemented at the rear by adjustabl hydraulically damped Girling units. The ride obtained was slightly on the firm side, but neither comfort nor damping qualities were ever sacrific in order to aid handling.

Line 15:

Generally, the Dominator had a very good temperament. If starting followed the customary drill then no difficulty was found when starting up a cold motor. After a few kicks the engine would burst into life and the bike would soon be ready to pull away without argument or hesitation. In town the Dominator was docile and pleasant to use, but once on the open road the bike would change into a beast that quickly swallowed up the miles. Into top and the power would begin to surge once it got to 50mph. Brisk acceleration would then continue right past the magic ton until a top speed of around 110mph was reached. Vibration was always present but never became unbearable or excessive even whe the motor was red-lined through the gears. Even a 7000rpm in each gear the motor never felt strained and once the next cog was chosen, the Dominator would surge on until all four gears had been used to the full. All changes needed positive use of the clutch, but generally the gearbox was faultless an never caused concern.

The bike also excelled in braking. Here, each unit employed was of the drum type with an eight inch at the front and a seven inch at the rear. These could always be depended on to give surefooted stopping whenever needed, and remarkably brake fade never occurred, even when high speed retardation became necessary. In the wet the units remained fully watertight and only ~~tyre~~ adhesion was responsible for the longer stopping distances produced. In the dry, however, a distance of approximately 27 feet could be obtained when braking from 30mph.

The bike also excelled in braking. Here, each unit employed was of the drum type with an eight inch at the front and a seven inch at the rear. These could always be depended on to give surefooted stopping whenever needed, and remarkably brake fade never occurred, even when high speed retardation became necessary. In the wet the units remained fully watertight and only tire adhesion was responsible for the longer stopping distances produced. In the dry, however, a distance of approximately 27 feet could be obtained when braking from 30mph.

Despite some niggling faults the bike was nevertheless an excellent sports machine. It cried out to be ridden hard and as a connoisseur's mount the Dominator performed admirably—a true classic.

Line 24:

[[Image:88.jpg|thumb|350px|Norton Dominator 88SS]]

Launched at the 1951 earls court show, the model 88 was the first of nine norton road machines to be equipped with the featherbed frame and very rapidly became a best seller, eclipsing the older framed model 7 with which it shared the same engine unit. the new frame had a bolt-on rear section with a loop running around the back to carry the mudguard but from 1954 onwards, this was welded into place. an 8 front brake also arrived in 1954, and for the following year, an alloy cylinder head, amal monobloc carburettors and full width wheel hubs. the norton/burman gearbox was replaced by the amc box for the 1957 range and there was also a new camshaft. the cylinder head was modified for better heat dissipation, and the pear drop silencers gave way to a tubular design. coil ignition with an alternator superseded the magneto and dynamo in 1958. there were then only cosmetic changes to the silencers and petrol tank until the slimline frame came in for 1960. during its 15 year span, the model 88 was produced at various times in standard, sports special and de luxe versions. the standard version was produced until 1963, but the twin ~~carburettor~~ 88 sports special (88ss) brought out in 1961 continued until 1966, with a downdraught head being introduced from 1962. the de luxe had a rear tinware enclosure and was in production from 1960 to 1962.

Launched at the 1951 earls court show, the model 88 was the first of nine norton road machines to be equipped with the featherbed frame and very rapidly became a best seller, eclipsing the older framed model 7 with which it shared the same engine unit. the new frame had a bolt-on rear section with a loop running around the back to carry the mudguard but from 1954 onwards, this was welded into place. an 8 front brake also arrived in 1954, and for the following year, an alloy cylinder head, amal monobloc carburettors and full width wheel hubs. the norton/burman gearbox was replaced by the amc box for the 1957 range and there was also a new camshaft. the cylinder head was modified for better heat dissipation, and the pear drop silencers gave way to a tubular design. coil ignition with an alternator superseded the magneto and dynamo in 1958. there were then only cosmetic changes to the silencers and petrol tank until the slimline frame came in for 1960. during its 15 year span, the model 88 was produced at various times in standard, sports special and de luxe versions. the standard version was produced until 1963, but the twin carburetor 88 sports special (88ss) brought out in 1961 continued until 1966, with a downdraught head being introduced from 1962. the de luxe had a rear tinware enclosure and was in production from 1960 to 1962.

{| border="1" cellpadding="10"

Difference between revisions of "Norton Dominator"

Navigation menu

Search

@@ Line 7: / Line 7: @@
 In 1953 the original plunger type rear suspension was replaced by a more efficient swinging-arm arrangement and shortly afterwards the frame was changed to the famous 'Featherbed', a legend in itself. These improvements now gave the Dominator excellent road manners which appealed to the sports-minded enthusiast, who now could experience the race-bred qualities that had previously been confined to the track.
-The 1961 sports special model had various modifications over the standard version. Most noticeable was the absence of silencer on the left-hand side. Instead, siames pipes were utilized and this obviously aided ground clearance when enthusiastic riding was called for In fact, ground clearance was so good that only tyre adhesion determined the angle of lean that was available.
+The 1961 sports special model had various modifications over the standard version. Most noticeable was the absence of silencer on the left-hand side. Instead, siames pipes were utilized and this obviously aided ground clearance when enthusiastic riding was called for In fact, ground clearance was so good that only tire adhesion determined the angle of lean that was available.
 Handling was also second to none, and on long twisting country roads the Dominator was a joy to ride. With positive steering and taut handling it gave the rider an unsurpassed degree of confidence. Obviously, the Featherbed frame was partly responsible. Roadholder front forks were used and these were complemented at the rear by adjustabl hydraulically damped Girling units. The ride obtained was slightly on the firm side, but neither comfort nor damping qualities were ever sacrific in order to aid handling.
@@ Line 15: / Line 15: @@
 Generally, the Dominator had a very good temperament. If starting followed the customary drill then no difficulty was found when starting up a cold motor. After a few kicks the engine would burst into life and the bike would soon be ready to pull away without argument or hesitation. In town the Dominator was docile and pleasant to use, but once on the open road the bike would change into a beast that quickly swallowed up the miles. Into top and the power would begin to surge once it got to 50mph. Brisk acceleration would then continue right past the magic ton until a top speed of around 110mph was reached. Vibration was always present but never became unbearable or excessive even whe the motor was red-lined through the gears. Even a 7000rpm in each gear the motor never felt strained and once the next cog was chosen, the Dominator would surge on until all four gears had been used to the full. All changes needed positive use of the clutch, but generally the gearbox was faultless an never caused concern.
-The bike also excelled in braking. Here, each unit employed was of the drum type with an eight inch at the front and a seven inch at the rear. These could always be depended on to give surefooted stopping whenever needed, and remarkably brake fade never occurred, even when high speed retardation became necessary. In the wet the units remained fully watertight and only tyre adhesion was responsible for the longer stopping distances produced. In the dry, however, a distance of approximately 27 feet could be obtained when braking from 30mph.
+The bike also excelled in braking. Here, each unit employed was of the drum type with an eight inch at the front and a seven inch at the rear. These could always be depended on to give surefooted stopping whenever needed, and remarkably brake fade never occurred, even when high speed retardation became necessary. In the wet the units remained fully watertight and only tire adhesion was responsible for the longer stopping distances produced. In the dry, however, a distance of approximately 27 feet could be obtained when braking from 30mph.
 Despite some niggling faults the bike was nevertheless an excellent sports machine. It cried out to be ridden hard and as a connoisseur's mount the Dominator performed admirably—a true classic.
@@ Line 24: / Line 24: @@
 [[Image:88.jpg|thumb|350px|Norton Dominator 88SS]]
-Launched at the 1951 earls court show, the model 88 was the first of nine norton road machines to be equipped with the featherbed frame and very rapidly became a best seller, eclipsing the older framed model 7 with which it shared the same engine unit. the new frame had a bolt-on rear section with a loop running around the back to carry the mudguard but from 1954 onwards, this was welded into place. an 8 front brake also arrived in 1954, and for the following year, an alloy cylinder head, amal monobloc carburettors and full width wheel hubs. the norton/burman gearbox was replaced by the amc box for the 1957 range and there was also a new camshaft. the cylinder head was modified for better heat dissipation, and the pear drop silencers gave way to a tubular design. coil ignition with an alternator superseded the magneto and dynamo in 1958. there were then only cosmetic changes to the silencers and petrol tank until the slimline frame came in for 1960. during its 15 year span, the model 88 was produced at various times in standard, sports special and de luxe versions. the standard version was produced until 1963, but the twin carburettor 88 sports special (88ss) brought out in 1961 continued until 1966, with a downdraught head being introduced from 1962. the de luxe had a rear tinware enclosure and was in production from 1960 to 1962.
+Launched at the 1951 earls court show, the model 88 was the first of nine norton road machines to be equipped with the featherbed frame and very rapidly became a best seller, eclipsing the older framed model 7 with which it shared the same engine unit. the new frame had a bolt-on rear section with a loop running around the back to carry the mudguard but from 1954 onwards, this was welded into place. an 8 front brake also arrived in 1954, and for the following year, an alloy cylinder head, amal monobloc carburettors and full width wheel hubs. the norton/burman gearbox was replaced by the amc box for the 1957 range and there was also a new camshaft. the cylinder head was modified for better heat dissipation, and the pear drop silencers gave way to a tubular design. coil ignition with an alternator superseded the magneto and dynamo in 1958. there were then only cosmetic changes to the silencers and petrol tank until the slimline frame came in for 1960. during its 15 year span, the model 88 was produced at various times in standard, sports special and de luxe versions. the standard version was produced until 1963, but the twin carburetor 88 sports special (88ss) brought out in 1961 continued until 1966, with a downdraught head being introduced from 1962. the de luxe had a rear tinware enclosure and was in production from 1960 to 1962.
 {| border="1" cellpadding="10"