Difference between revisions of "Honda CBF600"
(upgrading template) |
(adding recommended_oil) |
||
| Line 86: | Line 86: | ||
|fuel_capacity = 5.28 Gallon (20.00 Liters) | |fuel_capacity = 5.28 Gallon (20.00 Liters) | ||
|oil_capacity = | |oil_capacity = | ||
|recommended_oil= Honda GN4 10W-40 | |||
|fuel_consumption = | |fuel_consumption = | ||
|turning_radius = | |turning_radius = | ||
Revision as of 18:19, 2 August 2019
Intro
2004
- Engine Type: Inline 4 Cyliner, Liquid-cooled 4-stroke 16-valve DOHC
- Engine Displacement: 600cc
- Bore & Stroke: 65 x 45.2mm
- Compression Ratio: 11.6 : 1
- Carburetion: 34mm slanted flat-slide VP- type carburettors x 4
- Max. Power Output: 76 bhp at 10,500 rpm
- Max. Torque: 58Nm at 8000 rpm
- Ignition: Computer-controlled digital system
- Starter: Electric
- Transmission: 6-speed
- Final Drive: O-ring sealed chain
- Length x Width x Height: 2170 x 760 x 1175mm
- Wheelbase: 1480mm
- Seat Height: 785mm
- Ground Clearance: 130mm
- Fuel Capacity: 19 liters (including 3.5-litre warning light reserve)
- Dry Weight: 197kg
- Front Wheel: 17M/C x MT3.50
- Rear Wheel: 17M/C x MT5.00
- Front Tire: 120/70 ZR17M/C (58W)
- Rear Tire: 160/60 ZR17M/C (69W)
- Front Suspension: 41mm telescopic fork, 120mm axle travel
- Rear Suspension: Monoshock damper with 7- step adjustable preload, 125mm axle travel
- Front Brakes: 296 x 4.5mm dual hydraulic disc with dual-piston calipers
- Rear Brakes: 240 x 5mm hydraulic disc with single-piston caliper
 | This motorcycle, scooter, or moped-related article is a stub. You can help Cycle Chaos by expanding it. Contact User:Budlight if you need help. |
| Motorcycles: CB series | CBF series | CM/CMX series | CX Series | CBR series | NSR series | CR series | Pacific Coast | XR/XL series | Bros/HawkGT | VF/VFR series | VT series | VTX series | ST series | Valkyrie series | GL series| NR series |
| Mopeds and light motorcycles: Ape models | Cub series | CT series | ST series/Dax | S series |Wave series | Z series |
| 'Honda CBF600' | |
| Manufacturer | [[Honda]] |
|---|---|
| Also called | CBF 600 N, CBF600 S, CBF600N C-ABS, CBF600S C-ABS, CBF600N ABS, CBF600S ABS, CBF600F, CBF600N, CBF600S, CBF 600 S, CBF 600 |
| Production | 2005 - 2012 |
| Class | [[:Category:Road motorcycles|Road]] [[Category:Road motorcycles]] |
| Engine | in-line four, four-stroke |
| Bore / Stroke | 67.0mm x 42.5mm |
| Top Speed | 124 mph (200 km/h) |
| Horsepower | 74.83 HP (55.8 KW) @ 10500RPM |
| Torque | 43.52 ft/lbs (59.0 Nm) @ 8250RPM |
| Fuel System | injection. pgm-fi |
| Ignition | computer-controlled digital transistorised with electronic advance |
| Battery | 11.6:1 |
| Transmission | Gear box: 6-speed Final Drive: chain |
| Suspension | Front: 41mm telescopic fork, 120mm axle travel Rear: monoshock damper with 7-step adjustable preload, 125mm axle travel |
| Brakes | Front: double disc. dual-piston callipers and sintered metal pads Rear: single disc. single-piston caliper and sintered metal pads |
| Front Tire | 120/70-zr17 |
| Rear Tire | 160/60-zr17 |
| Wheelbase | 58.66 inches (1490 mm) |
| Length | 85.04 inches (2160 mm) |
| Width | 30.12 inches (765 mm) |
| Height | 48.82 inches (1240 mm) |
| Seat Height | 30.91 inches (785 mm) |
| Weight | 379.2 pounds (172.0 Kg) (dry), 213.0 kg (wet) |
| Recommended Oil | Honda GN4 10W-40 |
| Fuel Capacity | 5.28 Gallon (20.00 Liters) |
| Manuals | Service Manual |
The Honda CBF600N was a in-line four, four-stroke Road motorcycle produced by Honda between 2005 and 2012. It could reach a top speed of 124 mph (200 km/h). Max torque was 43.52 ft/lbs (59.0 Nm) @ 8250 RPM. Claimed horsepower was 74.83 HP (55.8 KW) @ 10500 RPM.
Engine
The engine was a liquid cooled in-line four, four-stroke. A 67.0mm bore x 42.5mm stroke result in a displacement of just 599.3 cubic centimeters. Fuel was supplied via a double overhead cams/twin cam (dohc).
Drive
The bike has a 6-speed transmission. Power was moderated via the wet, multiplate with coil springs.
Chassis
It came with a 120/70-zr17 front tire and a 160/60-zr17 rear tire. Stopping was achieved via double disc. dual-piston callipers and sintered metal pads in the front and a single disc. single-piston caliper and sintered metal pads in the rear. The front suspension was a 41mm telescopic fork, 120mm axle travel while the rear was equipped with a monoshock damper with 7-step adjustable preload, 125mm axle travel. The CBF600N was fitted with a 5.28 Gallon (20.00 Liters) fuel tank. The bike weighed just 379.2 pounds (172.0 Kg). The wheelbase was 58.66 inches (1490 mm) long.