Beta RR250: history, specs, pictures
Beta RR250 | |
Manufacturer | |
---|---|
Also called | RR 250, RR250M, RR 250M, RR 4T250, RR 4T 250 |
Production | 2006 - 2008 |
Engine | single cylinder, four-stroke |
Bore / Stroke | 75.0mm x 56.5mm |
Fuel System | carburetor. keihin fcr-mx 37 |
Ignition | dc-cdi without trembler with variable ignition |
Transmission | Gear box: 6-speed Final Drive: chain |
Suspension | Front: hydraulic usd fork with ø45 mm shaft Rear: monoshock with progressive compound lever |
Brakes | Front: single disc. double-piston floating caliper Rear: single disc. single-piston floating caliper |
Front Tire | 90/90-21 |
Rear Tire | 140/80-18 |
Wheelbase | 58.66 inches (1490 mm) |
Length | 89.37 inches (2270 mm) |
Width | 32.01 inches (813 mm) |
Height | 49.41 inches (1255 mm) |
Seat Height | 37.01 inches (940 mm) |
Weight | 257.94 pounds (117.0 Kg) (dry), |
Fuel Capacity | 2.25 Gallon (8.50 Liters) |
Manuals | Service Manual |
The Beta RR 4T250 was a single cylinder, four-stroke standard produced by Beta between 2006 and 2008.
Engine
The engine was a liquid cooled single cylinder, four-stroke. A 75.0mm bore x 56.5mm stroke result in a displacement of just 250.0 cubic centimeters.
Drive
The bike has a 6-speed transmission. Power was moderated via the wet multi-disc clutch.
Chassis
It came with a 90/90-21 front tire and a 140/80-18 rear tire. Stopping was achieved via single disc. double-piston floating caliper in the front and a single disc. single-piston floating caliper in the rear. The front suspension was a hydraulic usd fork with ø45 mm shaft while the rear was equipped with a monoshock with progressive compound lever. The RR 4T250 was fitted with a 2.25 Gallon (8.50 Liters) fuel tank. The bike weighed just 257.94 pounds (117.0 Kg). The wheelbase was 58.66 inches (1490 mm) long.