Husaberg FE 450 ENDURO
Husaberg FE 450 ENDURO | |
Manufacturer | |
---|---|
Production | 2012 |
Class | Enduro |
Engine | Single cylinder, four-stroke, SOHC |
Bore / Stroke | 94.0mm x 94.0mm |
Compression ratio | 11.9:1 |
Fuel System | Electronic fuel injection |
Transmission | Gear box: 6-Speed manual Final Drive: Chain |
Suspension | Front: WP USD 4860 MA Husaberg Enduro Rear: WP PDS 5018 Husaberg Enduro |
Brakes | Front: Single disc 260mm Rear: Single disc 240mm |
Front Tire | 90/90 -21 |
Rear Tire | 140/80 -18 |
Wheelbase | 58.31 inches (1481 mm) |
Seat Height | 38.19 inches (970 mm) |
Weight | 117.0 kg (wet) |
Manuals | Service Manual |
The Husaberg FE 450 ENDURO was a Single cylinder, four-stroke, SOHC Enduro motorcycle produced by Husaberg in 2012.
Engine
A 94.0mm bore x 94.0mm stroke result in a displacement of just 448.6 cubic centimeters.
Drive
The bike has a 6-Speed manual transmission. Power was moderated via the Wet multi-disc.
Chassis
It came with a 90/90 -21 front tire and a 140/80 -18 rear tire. Stopping was achieved via Single disc 260mm in the front and a Single disc 240mm in the rear. The front suspension was a WP USD 4860 MA Husaberg Enduro while the rear was equipped with a WP PDS 5018 Husaberg Enduro. The wheelbase was 58.31 inches (1481 mm) long.
2012 Husaberg FE 450 ENDURO
The heart of the new Husaberg generation is the new SOHC one-cylinder engine with a displacement of 448.6 or 565 cc. In addition to top performance, the developers' goal was a modern, compact design and a high degree of durability, as well as to position the crankshaft near the overall centre of gravity, thus facilitating the handling by means of the engine design.