Honda NT 650: history, specs, pictures
| Honda NT 650 | |
| Manufacturer | |
|---|---|
| Production | 1988 |
| Class | Naked |
| Engine | Liquid cooled, four stroke, 52 degrees V-Twin cylinder, SOHC, 3 valve per cylinder |
| Bore / Stroke | 78.7mm x 78.7mm |
| Compression ratio | 9.2:1 |
| Horsepower | 58.07 HP (43.3 KW) @ 5800RPM |
| Torque | 42.78 ft/lbs (58.0 Nm) @ 6000RPM |
| Fuel System | Carburetors |
| Transmission | Gear box: 5 Speed Final Drive: Chain |
| Suspension | Front: Telescopic forks Rear: Pro-arm single shock |
| Brakes | Front: Single 316mm discs 2 piston calipers Rear: Single 276mm disc 1 piston caliper |
| Front Tire | 110/80-17 |
| Rear Tire | 150/70-17 |
| Seat Height | 30.59 inches (777 mm) |
| Weight | 168.0 kg (wet) |
| Recommended Oil | Honda GN4 10W-40 |
| Manuals | Service Manual |
The Honda NT 650 was a Liquid cooled, four stroke, 52 degrees V-Twin cylinder, SOHC, 3 valve per cylinder Naked motorcycle produced by Honda in 1988. Max torque was 42.78 ft/lbs (58.0 Nm) @ 6000 RPM. Claimed horsepower was 58.07 HP (43.3 KW) @ 5800 RPM.
Engine
A 78.7mm bore x 78.7mm stroke result in a displacement of just 647.0 cubic centimeters.
Drive
The bike has a 5 Speed transmission. Power was moderated via the Wet plate.
Chassis
It came with a 110/80-17 front tire and a 150/70-17 rear tire. Stopping was achieved via Single 316mm discs 2 piston calipers in the front and a Single 276mm disc 1 piston caliper in the rear. The front suspension was a Telescopic forks while the rear was equipped with a Pro-arm single shock.
1988 - 1990 Honda NT 650
Kept in production for only two years, between 1988 and 1990, the Honda NT 650 came with liquid cooling system and with 2 CV carburetors.