Kymco Dink 125 Classic: history, specs, pictures
The Kymco Dink 125 Classic was a single cylinder, air-cooled, 4-stroke scooter produced by Kymco in 2006. Max torque was 8.11 ft/lbs (11.0 Nm) @ 6500 RPM. Claimed horsepower was 11.0 HP (8.2 KW) @ 8250 RPM.
Kymco Dink 125 Classic | |
Manufacturer | |
---|---|
Production | 2006 |
Class | Scooter |
Engine | single cylinder, air-cooled, 4-stroke |
Bore / Stroke | 50.8mm x 50.8mm |
Compression ratio | 10.6:1 |
Horsepower | 11.0 HP (8.2 KW) @ 8250RPM |
Torque | 8.11 ft/lbs (11.0 Nm) @ 6500RPM |
Fuel System | KEIHIN VE 22mm carburetor |
Transmission | Gear box: CVT Final Drive: belt |
Suspension | Front: telescopic fork Rear: monoshock |
Brakes | Front: single 220mm disc Rear: single 200mm disc |
Front Tire | 120/70-12 |
Rear Tire | 130/70-12 |
Wheelbase | 54.88 inches (1394 mm) |
Length | 76.18 inches (1935 mm) |
Width | 29.49 inches (749 mm) |
Weight | 135.0 kg (wet) |
Manuals | Service Manual |
EngineEdit
A 50.8mm bore x 50.8mm stroke result in a displacement of just 125.0 cubic centimeters.
DriveEdit
The bike has a CVT transmission.
ChassisEdit
It came with a 120/70-12 front tire and a 130/70-12 rear tire. Stopping was achieved via single 220mm disc in the front and a single 200mm disc in the rear. The front suspension was a telescopic fork while the rear was equipped with a monoshock. The wheelbase was 54.88 inches (1394 mm) long.
2006 Kymco Dink 125 ClassicEdit
The 2006 MY Kymco Dink 125 Classic sports an air-cooled, four-stroke, 125cc, single cylinder engine mated to a continuously variable transmission (CVT), that produces a claimed 11 horsepower and 11 Nm of torque. This machine comes standard with a two-up seat that has rider lumbar support and a passenger backrest, pillion grab handles, front and under-seat storage compartments and blacked-out, aluminum wheels.