Kymco Dink 50 Classic
The Kymco Dink 50 Classic was a single cylinder, air-cooled, 2-stroke scooter produced by Kymco in 2006. Max torque was 2.95 ft/lbs (4.0 Nm) @ 6500 RPM. Claimed horsepower was 4.02 HP (3.0 KW) @ 6750 RPM.
Kymco Dink 50 Classic | |
Manufacturer | |
---|---|
Production | 2006 |
Class | Scooter |
Engine | single cylinder, air-cooled, 2-stroke |
Bore / Stroke | 38.1mm x 38.1mm |
Compression ratio | 11.2:1 |
Horsepower | 4.02 HP (3.0 KW) @ 6750RPM |
Torque | 2.95 ft/lbs (4.0 Nm) @ 6500RPM |
Fuel System | KEIHIN PB 14mm carburetor |
Transmission | Gear box: CVT Final Drive: belt |
Suspension | Front: telescopic fork Rear: monoshock |
Brakes | Front: single 180mm disc Rear: drum |
Front Tire | 120/70-12 |
Rear Tire | 130/70-12 |
Wheelbase | 53.11 inches (1349 mm) |
Length | 74.8 inches (1900 mm) |
Width | 29.49 inches (749 mm) |
Weight | 112.0 kg (wet) |
Manuals | Service Manual |
EngineEdit
A 38.1mm bore x 38.1mm stroke result in a displacement of just 49.5 cubic centimeters.
DriveEdit
The bike has a CVT transmission.
ChassisEdit
It came with a 120/70-12 front tire and a 130/70-12 rear tire. Stopping was achieved via single 180mm disc in the front and a drum in the rear. The front suspension was a telescopic fork while the rear was equipped with a monoshock. The wheelbase was 53.11 inches (1349 mm) long.
2006 Kymco Dink 50 ClassicEdit
The 2006 MY Kymco Dink 50 Classic sports an air-cooled, two-stroke, 49cc, single cylinder engine mated to a continuously variable transmission, and can produce 3 horsepower and 4 Nm of torque. This entry level machine comes with a dual seat that has lumbar support for the rider and a passenger backrest, pillion grab rails, an under-seat storage compartment and a design that is sure to fit the taste for the younger among Kymco fans, and not only.