NCR 848 Special
NCR 848 Special | |
Manufacturer | |
---|---|
Production | 2009 |
Engine | NCR-848 motor has titanium connecting rods carved out of billet, high compression forged pistons with single piston ring, titanium valves, ported heads, lightened gearbox, balanced crankshaft, custom wet-type slipper clutch by STM for NCR, full racing aluminum radiator and oil cooler - relocated to accept full range of offsets of the front suspension, all fasteners in titanium. |
Ignition | NCR Corse-EFI, EFI Euro 1, NCR Racing Harness with interface with AMI MXL PISTA display. NCR-EFI system accepts full mapping capabilities along with Lambda interface for closed loop mapping control. |
Transmission | 6 Speed |
Suspension | Front: Showa original OEM fork with Öhlins-NCR internal damping systems. NCR fork bottoms from billet with 100 mm spacing. Triple clamps made from AL 7075 with adjustable offset from 28 to 36 mm in 1 mm increments. Rear: Öhlins TTX tuned by NCR |
Brakes | Front: 2x 300 mm WAVE Braking-NCR, radial Brembo Racing monoblock (100mm version) with billet NCR fork bottoms. Rear: Single 200 mm WAVE Braking-NCR, Brembo Racng 2 piston. |
Weight | 155 Kg (341 lbs) (dry), |
Manuals | Service Manual |
Chassis[edit | edit source]
Stopping was achieved via 2x 300 mm WAVE Braking-NCR, radial Brembo Racing monoblock (100mm version) with billet NCR fork bottoms. in the front and a Single 200 mm WAVE Braking-NCR, Brembo Racng 2 piston. in the rear. The front suspension was a Showa original OEM fork with Öhlins-NCR internal damping systems. NCR fork bottoms from billet with 100 mm spacing. Triple clamps made from AL 7075 with adjustable offset from 28 to 36 mm in 1 mm increments. while the rear was equipped with a Öhlins TTX tuned by NCR. The bike weighed just 155 Kg (341 lbs).
Photos[edit | edit source]
Overview[edit | edit source]
NCR 848 Special
For those who arent happy with their stock Ducati
848s performance, Nepoti and Caracchi Racing (NCR) are now offering some
special parts which will boost power, performance and handling. These include
titanium valves, titanium con-rods, Showa USD fork with heavily reworked
internals, fully adjustable Öhlins rear shock, 300mm brakes discs (at the
front) with Brembo monoblock calipers and an all-new engine management system.
A stock Ducati 848 weighs 168kg, and has 134bhp on tap. The full-blown NCR Ducati 848 weighs in at 155 kilos dry, and packs 145bhp at 12,500rpm and 118Nm of torque at 10,000rpm. Of course, at around US$61,000 its also a bit more expensive The NCR 848 is the result of a collaboration Ducati North America. This year, NCR was the official factory team of Dcati North America to compete in the PARTS CANADA SUPERBIKE CHAMPIONSHIP in the THUNDER Class. The team had two NCR 848's that were developed specifically to develop the full catalog of parts for this exciting new bike. The bikes were ridden by NCR Factory rider Valter Bartolini and Canadian Andrew Nelson. Between the two riders, they won all 7 rounds of the championship including all 7 pole positions and all new track records at every track (4 wins for Valter and 3 wins for
Make Model | NCR 848 |
---|---|
Year | 2009 |
Engine Type | NCR-848 motor has titanium connecting rods carved out of billet, high compression forged pistons with single piston ring, titanium valves, ported heads, lightened gearbox, balanced crankshaft, custom wet-type slipper clutch by STM for NCR, full racing aluminum radiator and oil cooler - relocated to accept full range of offsets of the front suspension, all fasteners in titanium. |
Ignition | NCR Corse-EFI, EFI Euro 1, NCR Racing Harness with interface with AMI MXL PISTA display. NCR-EFI system accepts full mapping capabilities along with Lambda interface for closed loop mapping control. |
Max Power | 145 hp / 108 kW @ 12500 rpm |
Max Torque | 12 kgf-m / 87 ft-lbs @ 10000 rpm |
Transmission | 6 Speed |
Final Drive | Chain |
Front Suspension | Showa original OEM fork with Öhlins-NCR internal damping systems. NCR fork bottoms from billet with 100 mm spacing. Triple clamps made from AL 7075 with adjustable offset from 28 to 36 mm in 1 mm increments. |
Rear Suspension | Öhlins TTX tuned by NCR |
Front Brakes | 2x 300 mm WAVE Braking-NCR, radial Brembo Racing monoblock (100mm version) with billet NCR fork bottoms. |
Rear Brakes | Single 200 mm WAVE Braking-NCR, Brembo Racng 2 piston. |
Wheels | Marchisini forged aluminum |
Exhaust | Termignoni full racing system |
Dry Weight | 155 Kg (341 lbs) |
Special Parts | Adjustable rear sets in AL 7075 and titanium, gas cap assembly in AL 7075, clip-ons in AL 7075 with titanium tubes, fork bottoms in billet aluminum, triple clamps from AL 7075 with adjustable offset from 28 to 36 mm, steering damper with billet mount, custom wheel nuts, billet oil fill cover, rear subframe in aluminum, front fairing stay in aluminum. All parts developed and produced by NCR. |