Difference between revisions of "Piaggio Liberty 150"
m (no summary specified) |
(upgrading template) |
||
Line 2: | Line 2: | ||
{{ | {{Motorcycle | ||
|name = '''Piaggio Liberty 150''' | |name = '''Piaggio Liberty 150''' | ||
|image = | |image = |
Revision as of 15:04, 30 July 2019
'Piaggio Liberty 150' | |
Manufacturer | [[Piaggio]] |
---|---|
Production | 2010 |
Engine | single cylinder, four-stroke |
Bore / Stroke | 62.8mm x 48.6mm |
Torque | 8.7 ft/lbs (11.8 Nm) @ 6500RPM |
Fuel System | carburetor |
Transmission | Gear box: automatic Final Drive: belt |
Suspension | Front: telescopic fork with hydraulic damping Rear: dual action hydraulic mono-shock with 4-setting adjustable spring preload |
Brakes | Front: single disc Rear: single disc |
Front Tire | 90/80-16 |
Rear Tire | 110/80-14 |
Wheelbase | 52.17 inches (1325 mm) |
Length | 76.18 inches (1935 mm) |
Width | 29.92 inches (760 mm) |
Seat Height | 31.3 inches (795 mm) |
Weight | 113.0 kg (wet) |
Manuals | Service Manual |
The Piaggio Liberty 150 was a single cylinder, four-stroke standard produced by Piaggio in 2010. Max torque was 8.7 ft/lbs (11.8 Nm) @ 6500 RPM.
Engine
The engine was a air cooled single cylinder, four-stroke. A 62.8mm bore x 48.6mm stroke result in a displacement of just 151.0 cubic centimeters. Fuel was supplied via a single overhead cams (sohc).
Drive
The bike has a automatic transmission.
Chassis
It came with a 90/80-16 front tire and a 110/80-14 rear tire. Stopping was achieved via single disc in the front and a single disc in the rear. The front suspension was a telescopic fork with hydraulic damping while the rear was equipped with a dual action hydraulic mono-shock with 4-setting adjustable spring preload. The wheelbase was 52.17 inches (1325 mm) long.