Vento Phantom Li: history, specs, pictures
The Vento Phantom Li was a single cylinder, four-stroke standard produced by Vento in 2007. Max torque was 6.27 ft/lbs (8.5 Nm) @ 5100 RPM. Claimed horsepower was 9.25 HP (6.9 KW) @ 7600 RPM.
| Vento Phantom Li | |
| Manufacturer | |
|---|---|
| Production | 2007 |
| Engine | single cylinder, four-stroke |
| Bore / Stroke | 57.4mm x 57.8mm |
| Horsepower | 9.25 HP (6.9 KW) @ 7600RPM |
| Torque | 6.27 ft/lbs (8.5 Nm) @ 5100RPM |
| Ignition | cdi |
| Transmission | Gear box: automatic |
| Suspension | Front: telescopic hydraulic fork Rear: twin shocks |
| Brakes | Front: single disc. single hydraulic disc Rear: single disc. single hydraulic disc |
| Front Tire | 130/60-13 |
| Rear Tire | 130/60-13 |
| Length | 74.41 inches (1890 mm) |
| Width | 27.2 inches (691 mm) |
| Height | 50.79 inches (1290 mm) |
| Seat Height | 34.8 inches (884 mm) |
| Weight | 229.06 pounds (103.9 Kg) (dry), |
| Fuel Capacity | 1.4 Gallon (5.29 Liters) |
| Manuals | Service Manual |
EngineEdit
The engine was a air cooled single cylinder, four-stroke. A 57.4mm bore x 57.8mm stroke result in a displacement of just 150.0 cubic centimeters.
DriveEdit
The bike has a automatic transmission.
ChassisEdit
It came with a 130/60-13 front tire and a 130/60-13 rear tire. Stopping was achieved via single disc. single hydraulic disc in the front and a single disc. single hydraulic disc in the rear. The front suspension was a telescopic hydraulic fork while the rear was equipped with a twin shocks. The Phantom Li was fitted with a 1.4 Gallon (5.29 Liters) fuel tank. The bike weighed just 229.06 pounds (103.9 Kg).