CF Moto ST Papio: history, specs, pictures
The CF Moto ST Papio was a single cylinder, four-stroke standard produced by CF Moto in 2017. It could reach a top speed of 56 mph (90 km/h). Max torque was 6.12 ft/lbs (8.3 Nm) @ 6500 RPM. Claimed horsepower was 9.25 HP (6.9 KW) @ 8500 RPM.
| CF Moto ST Papio | |
| Manufacturer | |
|---|---|
| Production | 2017 |
| Engine | single cylinder, four-stroke |
| Bore / Stroke | 57.0mm x 8.8mm |
| Top Speed | 56 mph (90 km/h) |
| Horsepower | 9.25 HP (6.9 KW) @ 8500RPM |
| Torque | 6.12 ft/lbs (8.3 Nm) @ 6500RPM |
| Fuel System | injection |
| Ignition | ecu |
| Transmission | Gear box: 6-speed |
| Suspension | Front: retractable type Rear: cantilever type |
| Brakes | Front: single disc Rear: single disc |
| Front Tire | 2.75-12 |
| Rear Tire | 3.50-12 |
| Wheelbase | 47.8 inches (1214 mm) |
| Length | 67.87 inches (1724 mm) |
| Width | 29.53 inches (750 mm) |
| Height | 39.17 inches (995 mm) |
| Seat Height | 30.51 inches (775 mm) |
| Weight | 114.0 kg (wet) |
| Fuel Capacity | 1.85 Gallon (7.00 Liters) |
| Manuals | Service Manual |
EngineEdit
The engine was a air cooled single cylinder, four-stroke. A 57.0mm bore x 8.8mm stroke result in a displacement of just 124.5 cubic centimeters.
DriveEdit
The bike has a 6-speed transmission.
ChassisEdit
It came with a 2.75-12 front tire and a 3.50-12 rear tire. Stopping was achieved via single disc in the front and a single disc in the rear. The front suspension was a retractable type while the rear was equipped with a cantilever type. The ST Papio was fitted with a 1.85 Gallon (7.00 Liters) fuel tank. The wheelbase was 47.8 inches (1214 mm) long.